VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Hi Guys,Recently I've installed this particular cisco ASA5510 at a client site (Head office), along with remote access VPN setup. All most 32 branches(one user from each branch) connect to the head office via remote access vpn. Further I've used the ...

Hi,I had a pix that had two working tunnels going to one 5510 and one 5520. Today the VPN tunnel to our 5520 stopped working but if I do sh cry isa sa both tunnels have QM_IDLE as the state. (both ends) I tried to debug crypto isakmp 255 but all I ge...

Buenos dias a todos,tengo un inconveniente en estos momento quiero una hacer una vpn any-to-any es decir que cuando cualquier origen salga a cualquier destino pase por la vpn.¿Se puede hacer esto? si es que es si ¿como puedo hacerlo?gracias de antema...

Can anyone recommend any small console server units with inbuilt 3G/GSM cellular router/modem?Looking to setup a kit which can be sent out to a site to provide remote console access to equipment onsite incase of failure or hardware issues. Looking fo...

da.newman by Level 1
  • 4985 Views
  • 0 replies
  • 0 Helpful votes

I'm very new to cisco devices but we recently acquired a catalyst 2911 device for our co-lo cabinet and I am trying to get a site-to-site vpn connection working between the facility and my offices network as well as a remote access VPN for me to use ...

mkennedy by Level 1
  • 1502 Views
  • 8 replies
  • 0 Helpful votes

I am attempting to install a 512 MB Cisco COmpact Flash for an ASA 5520.  We have inserted the compact flash but when we do a DIR, it does not show.  even as an unformatted device.  What do we need to do to make this a usable CF?  Do I just need to r...

dpatkins by Level 1
  • 4143 Views
  • 4 replies
  • 0 Helpful votes

Hi there,Last week I updated the software and RDP plugin in our ASA 5510 to the latest versions. Software is 8.4(3)9, to make RDP work on Windows 7 again, after Microsoft released "that" update.On Windows 7 machines (I have tried several), CPU utiliz...

Having a problem pinging across a site-to-site.  Any ideas would be appreciated. Anyconnect Client ---- ASA5505 ---- Internet(ipsec tunnel) ---- ASA5510 ---- LANDirectly connected ---^From a client PC with AnyConnect I can ping ASA5505, ASA5510, Serv...

Cybervex3 by Level 1
  • 1381 Views
  • 16 replies
  • 0 Helpful votes

Hi everyone,I have been working on a problem for a while but have yest to solve it. I have site A which need to access hosts on site B, this traffic need to go both ways.I have a site2site  tunnel between site A and Site B that works fine the tunnel ...

Hello, I am trying to get per-Tunnel QoS working on one of my Hub tunnels, and believe to have the configurations correctly, but when I do "show ip nhrp group-map" I get NONE. I am running a MPLS-VPN network and this router has multiple DMVPN Tunnels...

We are looking at installing a link between two sites and the provider says it will be a L2TP VPN link. We will need to create a IPSec site to site tunnel where part of its path will ride over this L2TP link. Are there any problems with running a IP...

I'm trying to configure a VPN beween a Cisco UC 540 and a Cisco ASA. The ASA is at a remote location. I have configured a site for the ASA in the Multisite Manager in CCA for the UC 540. What configuration changes would I need to make on the ASA to m...