VPN

Hi folks,I want to beta test a new release of the Windows AnyConnect client software with a small number of users.  We use the web deployment feature.  Is there a way for us to associate a specific version of the client software with a profile?  This...

Hi GuysI have a Cisco 5520 using ASDM 6.4Currently my VPN settings use a shared key without certficate to access the VPN. I would like to now set up a self assigned certifcte from the ASA to get users to import the certficate in order to VPN..How can...

Hi guysWe are investigating setting up a VPN to connect a potential 20,000 devices.Could someone recommend the model of ASA to best suit this (or another device if recommended)?From comparisons of the models I am not sure if any of the models support...

Hello!We use vpn-filter on central ASA 5520 (8.4(2)) to control traffic from remote sites.At remote sites we have 5505 and IPsec L2L to each of them.L2L crypto-acls look like this:access-list vpn-site1 extended permit ip 10.0.0.0 255.0.0.0 172.16.1.0...

hi all i am trying to get sdm v2.5  working on my 2621 with ipbase9-mz-124.17,i have looked on the cisco sdm v2.5 web site and it does say its supported,i pressume ive done the config right as i get all the way in then a screen pops up and says route...

Hi.Router: ASA 5510We have changed the ISP, so therefore new wan ip-addresses.Internet works, and site-to-site vpn works, but I'm failing to localice why the remote access vpn won't work.Any help / clue would be most graceful.

Hi allI have a setup in which there are two routers, one is a Linksys RV-024 and the other is a cisco 2811. Dynamic VPN has been set up between both of them. The newtwork behind the Linksys is 10.0.0.1 and the network behind cisco is 10.0.0.2. The us...

Hello All,Please I need help to create a VPN dongle for my office users. I have Cisco ASA 5005 firewall. I want to give them remote access to our intranet but if the user doesn't have the dongle which has the certificate on it he/she can not connect ...

Trying to get my anyconnect client 3.0 client for windows to enroll with MS SCEP server through my ASA.  Group policy is configured with SCEP forwarding URL http://<MS Server>/CertSrv/mscep/mscep.dll.  In the connection profile I checked the box for ...

Model: ASA 5520ASA: asa843-k8.binWe are having an issue with the the ASA RDP2 plugin, it has been working correctly since the installation of the ASA 2 years ago.1 month ago the functionality stopped working in IE activeX. I performed an upgrade of t...

Hi I'm looking for some help from someone who is currently using Cisco Anyconnect for their remote users and has written scripting for drive mapping to their shared drives when connected. Does this work well? Do you have to create a script and then r...

Hello!I have installed Anyconnect 3.0 and I have a 2911 as WebVPN gateway.Also I have a OpenVPN Server. Problem is that ping with Anyconnect ~500mc ( with DTLS...with TLS it is 800-900 mc) and with OpenVPN ~ 80mc. I think problem in Firewall/Antiviru...

I have a client set up with this range:ip local pool ClientVPN 176.16.11.210-176.16.11.241Somehow it is unable to give an IP to the client... If i change the range:ip local pool VPNproduction 176.16.11.150-176.16.11.160It works fine... What could be ...