Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Im using Cisco AnyConnect Secure Mobility Client Version 3.0.2052. It takes me about 10-15 minutes to connect after I enter in my FOB credentials.... And then I get asked again, before I get connected.... Very annoying to wait that long.And I get ...
Hi all,I'm trying to setup a Cisco 887 router to VPN to a watchguard device on the remote site.From what i can gather, the VPN tunnel is UP. I can ping to the remote server on the 192.168.110.0 network but whenever i try to browse to it the on local ...
In our organization we are using Cisco ASA 5540 (ISO version 8.4(3)12) for allowing IPSec VPN access to employees and vendor over internet. Employees are authenticated against Active Directory (via ACS) and vendors with locally created accounts on th...
Hi,Please see the attached diagram. We have a main office and 4 remote offices (only showing 1 remote office in the diagram). We are using GRE over IPSec VPNs to the remote offices which terminate on the 2811 router in the main office. We are using t...
we have a site to site tunnel ... connecting few users to a server at our site on a vpn tunnel... now the requirement is to have public accesss to this server from outside as this server also holds a website... any suggestions ..is this a NAT to anot...
Hi there,I've tried to set up IPSec over TCP with a VPN-Client V5.0.07.0440 on Win 7 64b to my ASA 5520 (Version 8.2(2)16) regarding to http://www.cisco.com/en/US/docs/security/asa/asa70/configuration/guide/ike.html#wp1059912IPSec over TCP activated ...
Hi all,We have deployed a network with central router which is connected to many router branches. we lost our connection to many of our routers via SSH/Telnet (mostly SSH).Moreover, we useing snmpv3 in our network. what we are trying to do is wit...
HiAfter we have upgraded our ASA5510 firewalls, we have got a strange problem.When user click at their WebVPN icon for connecting to a server.They see the RDP screen for a split second and then it return to the main screen (Portal Page) again.Any ide...
Hi Experts,We have an ASA 5505 in our environment and currently two IPSec L2L VPN tunnels are established. But we are planning to connect using Easy VPN(Network Extension Mode) to another site as Client. Is it possible to configure Easy VPN configura...
I have an ASA 5505 running 8.2(2) and I have AnyConnect set up and working, until last night. We are getting an error that states,"AnyConnect profile settings mandate a single local user, but multiple local users are currently logged into your compu...
We have a RRAS server on the inside. When the client from outside tries to connect it is unable to. I tried to capture packets and below are the results. Not sure how to understand it.RRAS server IP: 192.168.1.2Outside natted IP for RRAS: 2.2.2.2Exte...
Hi to all.i want make IPSec VPN between 2 site , the 2 site connect to Internet via dialer interface , and the both site on the same range of IP and same subnet Mask (10.0.0.0 - 255.255.255.0) , both site have this NATip nat inside source list NAT_AC...
Hi Everyone,I'm trying to setup a very basic EasyVPN from my ASA 5505 (home/client) and ASA 5520 (work/server/ IP 74.25.12.245). Everytime when I enable 'Easy VPN Remote' on my ASA5505, my home PC get disconnected from the internet.My ASA5505 client ...
Hello Team Cisco,I upgraded an ASA 5505 from 8.3(2) to 8.4(4) this evening. The 5505 is a backup and used to perform testing prior to production changes. After the upgrade was complete, a VPN tunnel began to fail. I did a limited search online to s...
