I have a /29 public block on a PIX515A partner says I must proxy/NAT one of the public IPs in the tunnel instead of the internal private addressesDo I just need the additional global and a static NAT for the tunnel?
I have a /29 public block on a PIX515A partner says I must proxy/NAT one of the public IPs in the tunnel instead of the internal private addressesDo I just need the additional global and a static NAT for the tunnel?
Please,I am trying to connect with Cisco VPN Client using MS Radius, but appears the message : Authentication reject: unspecified.I tried also use the option [x] Do not required pre-autentication, but don´t working of guide cisco_vpn_msradius.pdf - t...
Hello,following situation:ASA 5520 running 8.0(4)28.Serving multiple VPN groups using either Anyconnect or VPN-Client.One of the Customers using group XXX does not want that his group is able to be etablished using anyconnect.User auth is done by an ...
Hi,There is a requirement to configure 2 gateway peers for a single tunnel. I dont see any command after "set peer" that would actually allow us to create a second peer for the tunnel. Is there a way to do this. Or if I give the command "crypto-map o...
Hi,I can make a remote access vpn with ASA using its outside IP, every thing goes well. As soon as I add static NAT on the router for ASA's outside IP & try vpn with the global IP following error comes on the ASA whereas I can see the translation on ...
Is it possible to create an IPSec tunnel between these two devices?
Hi all, I'm trying to replicate a site to site VPN before I go and install in but having a couple of issues, the tunnel is up but I’m having problems pinging laptops connected to each of them, the error is at the bottom of this thread.I'm using pix 5...
I have a PIX that suddenly does not want to send traffic to remote users anymore. VPN connection is established as it should, but no traffic gets out, and the only thing I can find in the logging is "IKE Initiator unable to find policy". I verified t...
Hi,I am currently using ezvpn for branch office and remote access and I have a plan to deploy SSL vpn.The device i use is ASA5510.At the same time i deploy SSL vpn, I will start using DAP.My question is what kind of DAP rule i should create for ezvpn...
I have 150+ vendors connected to our primary data center via site-to-site IPSEC VPN tunnels on ASA's. I want to also connect these vendors to my D/R data center and have these back-up tunnels (at each vendor location) become active whenever a primar...
Hi Cisco Experts,I'm using a 877w Cisco router as endpoint for L2TP2 tunnels. I use an Microsoft IAS (radius) for the authentication. Until last week, all wwas working fine, but now, when my clients tries to establish an L2TP tunnel, the tunnel is es...
I have to setup a router with multiple site to site tunnels. I already have one of the tunnels established. The subnets at each branch office will NOT overlap.I am using NAT Overload w/static nat translations, I have a route map to except vpn traff...
I have a Cisco 3745 router with 48Digital Modems and 2 x E1 interfaces E 1/0 and E 1/1 i have configured for 1 Pri Circuit to Dail out (E 1/0) and the other to dialin (E 1/1).I have configured the lines 65 - 94 for dialout and dialin line 97-117 . Ho...
I'm doing a vpn client to microsoft but I have an ASA and I can not log the following error 'regular translation creation failed for protocol 47 src inside:192.168.x.x dst outside:155.229.204.x'
Hi guys,I am getting my head round Cisco ASA's gradually. I am trying to understand what restricts site to site traffic.We have a central ASA that hosts the main internet Gateway.We have a branch with a PIX that has a site to site VPN connection.I wo...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-06-2024 03:27 AM | ||
09-05-2024 02:50 PM | ||
09-05-2024 11:57 AM | ||
09-03-2024 01:41 AM | ||
08-31-2024 05:31 PM |
User | Count |
---|---|
8 | |
5 | |
3 | |
1 | |
1 |