VPN

Hello,Can someone help me to check what kind of filtering can prevent to succesfully complete isakmp process using certificates as it works fine with preshared keys.Both devices are cisco routers and synchronized on UTC and Certificates are OK.The on...

l used to configure PIX 6.x as PPTP server by using vpdn command and then use XP native pptp client to connect to the PIX.Does ASA support the same functionality? l checked the config doc and command reference and did not find any info. It looks like...

Hi, my customer has a problem to connect CVPN 4.6clients and WinXP/l2tp users to his ASA. Problem seems to be that IPSec uses tunnel mode and l2tp uses transport mode.Only one mode is active in transform set.Is there any solution?Regards Guenther

I have a request to build two IPSEC VPN tunnels across two different ISPs on site A going to site B with one ISP and a Pix. Site A has a Pix, and a couple of 2691 routers. Which design would make better use of two ISP redundancy at Site A, two rout...

How do I obtain the latest version of the VPN cleint software for windows and OS X? The download site is password protected.

Hi EveryoneIs it possible to configure the ASA 5540, using LAN based Failover, to load-balance IPSEC LAN to LAN VPN's ?I have the feeling that this cannot work, because i believe the active Firewall always will overwrite the Secondary Firewall "load-...

TWO 2801 router have connected isp through ADSL.So Could they connect with site to site vpn? how to handle the dynamic ip in two side?

Hi,We are starting the Cisco VPN client from running the ipsecdialer.exe command. If the user types an incorrect password we would like the username/password popup box to appear. This works well in our old version (4.0.2.B). However with the new clie...

We have a Cisco VPN 3005 as our endpoint. Clients connection using the Cisco 4.7 client. Currently here is the basic config on the device:Pub Interface 65.xxx.xxx.xxxPrivate Interface 172.22.0.3/16VPN Addy Pool 172.31.1.0/28Static routing is used to...

Hi all,My vpn client could not login to the ASA. I found the log in the ASA. Please see the attachment.Thank you for your help.Regards,Steven Hoo

Hi,I have a Cisco 1721 with two BRI WIC's, and I use it to connect some remote routers, and among them some are one-BRI, and some are two-BRI ports.With these last ones, I'd like to use no more than one BRI, so I can connect to two places at the same...

HiIs it possible with two Pri links with one number like 9718000 and one acounting server users authenticate on one Pri and another users on another Pri ?Thanks.

I am tring to configure a site to site vpn between my Checkpoint NGX r60 and a 837 adsl router. I am a vpn virgin using a cisco router. Can anyone tell me where I can get configuration examples from?

Hi,I have configured WebVPN client using Cisco SSL VPN client on VPN Concentrator 3030. But every time the user logs in, the Client software get installed. Is there anyway to avoid this and configure in such a way that after the user gets authenticat...