VPN

I've been trying to configure an L2TP VPN for our company remote employees to use VPN in hotels around the world as the Cisco VPN ports are often blocked. I've used Cisco's own L2TP examples, and examples from various forums. All have the same respon...

Is it possible to build IPSec tunnel with Cisco VPN Client and Linksys VPN router?

I have internet access, I have the right username and password, and I have added ports to the windows firewall both UDP and TCP/IP info and still I get Reason 403:Unable to contact security gateway.

Can anyone tell me if Cisco have resolved the issue with the VPN client integrated FW and Windows Vista. I have downloaded the beta version 5.0.0.90, but this doesnt work if I set my VPN policy requiring that the client use the IFW.I have clients co...

Hi,I've configured a multi-site VPN using SDM. I've attached the config for the central router. It's an 1801 running IOS 12.3. There are 877's in the remote offices.What I'd like to know is that whether it's possible to stop the VPN links being dropp...

Hi all, I have a very basic question.Can I use a firewall enabled IOS to simulate a PIX Firewall?ThanksReza

I have a Unix server on my internal network and when I VPN in to my office I can't connect to it. The Unix server has an IP address that's in the range of all my Windows 2003 servers but I can't ping it or connect to it. If I'm sitting in my office e...

Hi, We've recently started getting weird behaviour on PCs with the Cisco VPNClient installed on them. We'regetting Event Id 5003 TrueVector Service failures and strange behavioursuch as tn3270 sessions timing out / dropping and also ftp clients fre...

I recently swapped an older vpn con 3030 for newer vpn con 3030. The new harder had updated OS 4.7.2.k. I had two sets of devices to change. On one of the devices I am now not able to access the device with HTTP or HTTPS. I can access with telnet...

Hi,I have a question about mode configuration. If the same peer makes several config requests to a router (an 871 in my case) protected by one IKE SA, will it always get the same IP address from the responding router?I would like to request more than...

I have cisco AS5300, he has 4 ports T1 and serial port.usually I configure it by HyperTerminal from my computer via serial port.i'm the administrator add and remove user accounts so people can pass with their names and passwords via dialUp connection...

Greetings,Currently I have around 50 users behind an ASA 5510. These users wants to connect to a remote PIX 501 using Cisco VPN client. But this is not working as no more than one Cisco VPN client is not supported on NAT/PAT.PPTP VPN is another optio...

Our webVPN users experience sessions drop out intermitently using VPN 3000. we gets the following error message in the event log:8853 03/26/2007 07:09:24.700 SEV=4 STC/4 RPT=326 60.49.118.57 CTX: 0x490006: Error(3/17): Detected error in SG protocol88...