VPN

I'm having a problem whereby I'm trying to conect to a third party RAS server with a space in it's hostname. As I'm running AAA authentication PPP on my router, I have to create a username & password locally. The problem that I'm having is that the R...

HiI've a problem on an ASA5510 with a CSC-SSM module (trendMicro). If there is http-Scanning enabled then internet radio doen't work. I worked out that if real-stream is enabled then it works fine. But if there is windows media streaming enabled then...

I am looking to bring up a small office in China over DSL/VPN. I am looking at the Cisco 870 series routers but not sure which model to get. Can someone tell me what type of DSL is avialable in China ? and which 870 series router I should get ? And a...

Hi,I need to be able to connect to our company routers from my house. I think I have most of the pieces to the puzzle I'm just not sure how to put it all together. We have 2811 routers with the SDM loaded. I have a broadband connection at home and ...

Hi all, First time post and hope someone can help me! I have been dealing with a problem on our 1751 router which has been ongoing for some time. The router running 12.3(2) K9 IOS and is configured for dynamic VPN IPsec connections. Remote users use ...

Due to a change in user authentication, we have stood up a Microsoft VPN solution that is running in conjunction with our Cisco VPN Concentrator. The Cisco and Microsoft public and private interfaces are attached to the same Cisco 2950 switch. Since ...

I have a PIX515E, (7.2.2) with several IPSEC VPN's configured. They are "subnet to subnet" with NAT-T. I need a new VPN to a new client that "prohibits routing private IP addresses within their network". So I guess I have to NAT my entire subnet to a...

I have a PIX 6.3 that I am trying to establish a tunnel to a remote site.I am getting the following error:106011: Deny inbound (No xlate) tcp src inside:10.11.150.1/1673 dst inside:10.79.15.3/5202A couple of questions about the config pieces below:Sh...

I connect to my remote network (Pix501) using EasyVPN with a shared key. I have checked the allow local lan access selection on the transport tab but cannot access the internet through my local lan/router. Any suggestions?

I have a main office with PIX 515 and remote office. We want to be able a couple Cisco VPN clients to be able to connect in the same time from the remote office but we have one real static address. How can we resolve this?I also tried one of the cli...

Tried set up a basic VPN Client here,I am able to get in, but if Ping inside one of the servers, for example:ping 192.168.101.10 -tit work for first min or so.. then unreachable...thanks guys

hello we currently have a vpn service for windows user where we have the VPN3000 Required-Client-Firewall-Vendor-Code set to 1 for the Cisco Integrated Client Firewall. this works fine for XP users but obviously not for Vista. Vista works fine withou...

My router it`s crashing. What`s the problem? Thanks.My ios is c837-k9o3y6-mz.123-2.XE4.

When I tried to reset my password via Administration\Access Rights\Administrators via HTTPS, I get"You do not have sufficient authorization to access the specified page."I got this account from the last admin, not sure how I can reset the password. C...