VPN

I want to do an Ipsec tunnel between VPN 3000 concentrator and internal Radius server to encrypt PAP authentication. In this device, WebVPN uses PAP and there is no option to change it.The problem is that you can only do IPsec tunnels from the publi...

I have a newly purchased 831 router and either I've screwed up the configuration, or it is faulty.Yesterday, I was able to get to it using the 10.10.10.1 IP. I tried to set it up to connect to my DSL (via a DSL modem in Bridge Ethernet mode).I was n...

There're many solaris x86 users who'dlike to have Cisco VPN support. Is Cisco working on it?Thanks

Hi, Is there is any relationship between SSH and VPN. I did a VPN configuration in my router and to get connected using the Cisco VPN client. The VPN worked fine and was able to connect reomtely. Then i applied set of commands for SSH. I can use putt...

Hi,Is there is any relationship between SSH and VPN. I did a VPN configuration in my router and to get connected using the Cisco VPN client. The VPN worked fine and was able to connect reomtely.Then i applied set of commands for SSH. I can use putty ...

A quick one for a learner like myself.I'm looking to configure a group-async interface which acts as a callback server, but my research seems to suggest, that a certain command "dialer-map class" is reserved for ISDN interfaces only. Is this a fact? ...

Could someone please sanity check my working here as I am having trouble getting a CME router to present the correct calling number using ISDN-2e trunks in the UK.In order to present the number 123456 as the calling number on an outbound call I have ...

I'm having trouble making NAT-T connections from a 4.8 client behind a Checkpoint FW-1 to any PIXes, ASAs, or 3000 series concentrators on the Internet.The IKE SA comes up fine, NAT detection and NAT-T negotiation works fine (the IKE SA is moved to u...

Hi to all, i'm using Cisco ssl VPN client 1.1.0.54 on concentrator 3005 rel 4.7.2, i'd like to be able to turn on "allow local lan access" on ssl vpn client, but i'm unable to find how to do this.Can someone help me?Thanks

Hi,Can you please guide or refer me about the shortcomings of IPSec protocol? I just could not figure it out.Vin

I want to find out if users are using their vpn. How can i do this through console or asdm.

I'm looking for the pinout on the power supply that UBR904 and UBR924 cable access routers use. The adapter is $90-100 online and I already know the voltages, I just need to know which pin is which! Any help would be appreciated, thanks.

Hi,I am trying to debug the key exchange for a IPsec VPN using a CA. I am running IOS 12.2(15)T5. There doesn't seem to be a crypto key-exchange command, however. It is listed in the "Cisco IOS Master Commands List, Release 12.2 T", but I can't se...

When tried connect to office with vpn client 4.8 not connect a logg this error with router debug:Mar 14 16:21:08 GMT: ISAKMP:(0:0:N/A:0):Checking ISAKMP transform 13 against priority 1 policyMar 14 16:21:08 GMT: ISAKMP: encryption DES-CBCMar 14 ...

We have a PIX 515 and I would like to set up RADIUS authentication for the remote users that will be connecting. How do I set up the PIX to use LOCAL authentication if the RADIUS Server is down?Thanks in advance,Jeremy