VPN

hi,i have pix 525 running OS ver 6.3(4) the outside interface is connected to cisco router 1721 which is connected to internet i made vpn configuration on pix and the client can access every thing inside my network except i can not telnet into pix or...

Hi All,I am configuring a Cisco modem WIC-1AM on a Cisco 1760 router using the following configuration and it won't operate, i issue debug modem and debug dialer but nothing appears.username test password 0 1234!interface Async3ip address negotiatede...

Hello, Nice to meet you all here.Recently, i have exprienced a problem about VPN redundency connection.I have constructed two site to site VPN between two router, the function of these two VPN is to provide a redundency service for this two router. O...

Hi,i´ve a problem with my VPN Connection. Hardware is a 836 with 12.3 release. The router is connected with the Internet. What i want is to connect me with the Software-Client to the Inside private 10.0.0.0 /28 Network.The crypto configuration is OK....

Hi all,I have a small network with two sites connected thru a VPN Tunnel. Main site has a 837 ADSL router. I have configured without problems the static site to site VPN. Now I am trying to set up, on the same interface of the same router a configura...

Hi all,I have ran out of ideas on this.I have 2 sites VPN'ed and working ok. Site1 is connected to the web thru ADSL on a 837 router (IOS 12.3(2)XC2). Now I must setup the 837 for Easy VPN server for Cisco VPN clients. I've tried with SDM, which made...

I'm trying to install VPN Client 3.54, but when I try to install, it comes back and gives me this error message.. "VPN client is not compatible with Microsoft's Internet Connection Sharing. Internet Connection sharing must be uninstalled before VPN...

Hi all,I have very basic question aboutconfiguring RAS with digital modemsand AAA through TACACS+. I use command peer default ip address pool OLA under interface Group-Async0 and interface Dialer10for example. And inside router I configure this pool ...

Hi,I have 4 Port ISDN card installed in CISCO 3745 with IOS version 12.2 (13) T8.The ISDN lines are connected to only BRI 1/0 & BRI 1/1 ports.When I give Sh ISDN status, the status of BRI 1/3 port is as belowRouter#Sh ISDN STATUSISDN BRI1/3 interface...

Hello, I am facing a some problem for remote access to configure on 501 PIX. Following is the Error which i get on CISCO VPN Client Cisco Systems VPN Client Version 4.0.2 (A) Copyright (C) 1998-2003 Cisco Systems, Inc. All Rights Reserved. Client Typ...

Does anybody know how to tell a cisco router to send the calling party number as Username TLV to a RADIUS server, instead - which is default - the username used during login.Background: In an existing Dial-In szenario a lucent RAS should be replaced ...

Hi,i constantly am away from office, and regularly need to connect to the office to make some changes on our server. all computers as mine are mapped to 4 drives on the server to get access to the program we all use. how do i set up a VPN on pix so t...

I am continuously receiving the following Syslog error messages from the location routers given below 2005-09-01 09:28:50 Syslog.Warning 10.0.0.1 71528: .Sep 1 09:29:22.862 IST: %CRYPTO-4-IKMP_NO_SA: IKE message from 202.101.231.4 has no SA and is...

Hi AllI'm having a problem with a VPN user...they get ftp transactions fail after 138K has been sent from home to the office, but ftp is OK the other way! They can ping and traceroute from the office to home, but traceroute fails the other way and pi...