VPN

I am in the console of a 300o concentrator and need to clean house on this thing. Can anyone rememner what the command is for this?

Hello,I really need help on this issue that i am having. Any help is greatly appreciated.I am trying to create a bi-directional LAN-to-LAN IPSec tunnel between a PIX 501 at a remote office and Cisco VPN 3005 concentrator at the central office.The tw...

I have a VPN client setup that works great for my internal network. But I need them to be able to access a secondary internal network, which currently they can't do. I can ping the devices fine from the PIX (meaning the routes and return routes are...

Hey there.I have an problem when i call in with an 1603 to an 7200 router with an pri interface.After i configured ppp multilink.the commando : "sh isdn ac" show's the next thing.---------------------------------------------------- I...

Hello! I'm wondering if it's possible to configure two 831 routers to have a VPN between them when they're each getting DHCP addresses from ISPs. (Also, will need to connect clients at some point.) I see in the docs that "EasyIP" will allow the 831s...

After installing Cisco VPN Client version 4.0.4 & 4.0.5D on several Windows XP laptop machines (with or without Service Pack 2) connections seem to work fine using local area network FastEthernet interface, but not at all on Dial-Up remote access int...

Hi All,Recently tried to install the VPN client on one of my user's notebook for his travelling needs. Nothing unusal during the installation.However after the instllation is completed and reboot, the VPN client cannot make any connection when the co...

I have a cisco 1720 router, I want to set a site-to-site VPN through it, so I installed a WIC-1ENET card in it and upgrade the IOS to 12.3(3a) version, but I can't find all IPSec relative command in it (such as: crypto), so I want to know which the l...

I have a PIX 520. Could someone tell me how many IPSec/VPN tunnels a PIX 520 can support? I noticed in "show crypto engine" output that the "size is 16". If I want to build more than 8 tunnels (I think each tunnel takes up 2 crypto engine connecti...

Greetings,This as5350 is running Cisco IOS Software, 5350 Software (C5350-IS-M), Version 12.3(4)T6, RELEASE SOFTWARE (fc1)The application includes:Inbound dialup Internet access;PSTN to VoIP SIP media gateway.I have 1 T1 controller out of the 8 inst...

I've installed on my computer suse linux 9.2 an cisco vpn client version 4.6.I compile the program and goes fine, but whe I try to start the service this message is shown. start: /etc/init.d/vpnclient_init start ha producido 1 (error no especificado)...

I have got two 828 G.SHDSL brand new routers and want to test them back-to-back. Can some one guide me as its my first experience working on the router.Also I have tried the sample config from Cisco site http://www.cisco.com/en/US/tech/tk175/tk274/te...

Hi,i implemented a project about a week back,the scenario for which went something like this:A head office site where a PIX515E is installed having a static public IP on its outside interface.Three remote sites,each having connection to the internet ...

I trying to establish a vpn to a SEF 7.04, but when cisco calls sef we have the following msg:IKMP_NO_ERR_NO_TRANSOn SEF side we have the following msg:isakmpd Info: Error while processing data rcvd from peer 200.x.x.13: (-3396) Invalid cookie in ISA...