I have been handed the task of figuring how to implement a WIC-1AM in a 2620XM running 12.2(8)T5. We want to implement the card only so we can dial-in and manage router, i.e. bounce interfaces, troubleshoot WAN issues, etc. I know it is not the best ...
Scenario : Headoffice needs to be connected via internet(using vpn/ipsec tunnel)with 4 branch offices.(two way connectivity). Users behind each lan(sites) must be able to surf intenet and can make a secure connection with the Hea...
I replaced a Wathguard Firewall with a Pix 501. Since this migration, we are not able to establish a vpn tunnel with remote sites. Even if we use TCP 10000 port. The VPN software we are running is 4.0.5 and the Pix is running 6.3.3.Thank you,Sev
Hello,I try to install a digital certifcate from verisign on a vpn concentrator (release 4.1.6). This certificate shall be used for WebVPN-HTTPS (SSL).When I try to install the certificate for SSL I get following error message:Error installing SSL ce...
I have the following scenario:pix501---router----isp---router---pix515I want to encript data (ipsec, 3des, etc.) between the two pixes.Can anybody suggest me how to do it?Regards,Charlie
Hello,I am having an issue with one laptop not being able to connect to my VPN concentrator from Ethernet or wireless, but dial up works fine. I have disabled the XP firewall, disabled TCP/IP filtering, disabled the IPSec service and still nothing, ...
I cannot access my Citrix apps over connections through a Cisco 3020 SSL VPN. Enabled port 1494 forwarding, configured altaddr on Citrix but no go. Works fine over client-based VPN connections. I am told that the SSL VPN feature is for HTTPS traffi...
When we bring a new customer on board, we set up a VPN between that customer's network and ours. On our side, the tunnel endpoint is our PIX 515. On the customer side, it's a PIX 501. The tunnel is 3DES IPSEC. We require the customer site to allo...
I have setup a 2600xm router as a dialin server. I have no problem when i dialin using hyperterminal but i receive the above error when users try to dialin from home.Please can help as this is driving me nuts???sh ruDialup#sh running-config Building ...
Hi Is it possible to pass web traffic that hits a PIX 501 external interface through a S2S vpn to an internal web server?This is an example configuration of what we want to achieve (IP addresses are made up):Inbound web traffic ¦ ¦ ¦ 212.133...
We run our VPN service off our PIX 525s. The PIX is currently giving out the IP addresses for the VPN IP's. Can I put that IP range in its own VLAN? Can I trunk to a PIX using DOT1Q on the switch?
Our domain name has changed. I also want to change the hostname of the firewall. However, when I do, I get this error.We have a few Tunnels built between some firewalls. Is this what is generating that error? What do I need to do to get everything ch...
A bri int backup i am using in the UK defaults to standby mode with backup load commands. Works well with backup load thresholds, but won't come out of standby if administratively shut. What if the Serial line really goes down? Do I have backup? It s...
