VPN

I am wondering if I can pass multiple networks thru my current VPN tunnel.I have a Pix515 (site A) and a Router (site B) setup with a VPN tunnel between sites A (172.16.10.x) and B (172.16.90.x)the tunnel passes traffic for these networks perfectlyI ...

I just upgraded our VPN 3005 to version 4.1 to get the Web VPN capability. The web piece works fine, but now the IPSec client software won't connect to the public interface, and I can't connect via SSH either. I can still connect to the private int...

Hi,I want to connect a site to my central office.At the central office i have install a PIX 506E and the ISP a Cisco router SOHO97 (NAT disable).The PIX is configured to terminate VPN traffic. I have some notebook with Cisco VPN client.It works fine....

Hello ,I have a request to allow couple of hosts from Internal Network to DMZ Zone host through port 25 for SMTP emails . I can create static , but that will open all ports . I created an access list from Inside hostto DMZ host eq 25 and created Sta...

Folkswe hv built a site-to-site vpn from PIX 515 to a linux vpn server.Today I noticed a strange problem.When I check the "sh isakmp sa" it doesn't show any VPN tunnel but Iam able to access the apps over the vpn tunnel.The tunnel is up but doesn't s...

I have a problem getting my pix to authenticate and enroll with MS CA. I get strange error messages.Here is the attachment:Any help is appreciated. Thanks,sp

Hi!Could somebody help me whith an configuration between PIX501 connected to ADSL (dynamic ip-address) and Watchguard FB.When i have "ip-address" as identity in phase1 it works fine. But when the the external ip-address change of the PIX this wont w...

Hi, i have site-to-site tunnel between site 1 and site 2. Site 1 has one cisco 2611 and site 2 has two 1710s. How can i configure the two 1710s at site 2 for failover . Both 1710s are connected to same ISP . What i am trying to do is very similar as ...

I am trying to get a sustained Lan-to-Lan tunnel between a Linux router running Freeswan & a 3030 concentrator. The tunnel stays up OK for a while but I have noticed that when the IKE timeout comes up & the key renegotiation occurs the 3030 logs a f...

Hi all!!I hv a pix 515E box using which I hv a VPN tunnel over the internet(from the outside interface).Now I want to build another VPN tunnel from the outside i/f to another destn ip.Pl let me know if this is possible & what precautions I need to ta...

i have site to site vpn with 2 pix firewalls. the connection works fine but when i try and use radius/acs for the ssh authentication instead of local i receive the messages under logging:710001: TCP access requested from x.1.61.12/4689 to inside:x.21...

I have configured the pix to allow pptp connections. I can connect and authenticate but I cannot seem to be able to pass any traffic. Also does anyone have the problem of not being able to clear vpdn connections. when I issue clear vpdn tunnel id (id...

I cannot access Windows NT hosts through the PIX but I can access the Windows 2000 hosts. Ping works to both. Ports opened applies to the subnet where all hosts sitting. Are there differences in Windows 2000 and NT to access through PIX in enabling p...

I need to make a pptp tunnel from a cisco router with a Microsoft Server, i've searched the cisco site over and over. Probaly missing something realy simple but i can't seem to find any configuration examples.My setup has to be as follows, clients in...