VPN

Hello,A VPN session in my VPN router is showing "UP-NO-IKE". I have to clear VPN session or the remote end VPN reset its IPsec.What could be the possible that makes this session status "UP-NO-IKE"?Thanks,

Hello, I am facing issue to connect with my ASA 5520 with anyconnect or ftp internal server. i was a begineer and i don't know what is the issue.i have pasted config and also attached running-config. i know i have wrong configured ACL and NAT but las...

Hello Team,   The customer has a deployment of AnyConnect which only uses the NAM (VPN functionality is not in use) to access the wired network using dot1X EAP Chaining (both user and machine are authenticated).    Version: Windows Version 1803 (OS B...

Hi,I have configured access to VPN based on assignment to specific AD group. If user is in that group, VPN works, if the user is not there - VPN doesn't work.When I try to login and my AD password is about to expire, I am able to change it whether I ...

We are running into an issue that I'm sure others have encountered. Here a brief summary: Group Policy A contains hosts A,B & CUser 1 needs access to hosts A,B, & C so he is mapped to group policy A User 2 needs access to only host B so another group...

Greetings,     The environment is running the FMCv with ASA-5506-X backed by Cisco ISE. I have seen public Cisco pages for features but couldn't find much on the following: Multiple Groups in the AnyConnect Client. Is it possible to segregate the use...

Hello! I ran into this problem Yesterday, Cisco anyconnect secure mobility client actually works but it's constantly "Acquiring IP Address while connected to WLC  and IP remains same. Internet access is fine but it breaks in middle all of sudden.In f...

Does anyone know how to implement secure SSL renegotiation on Cisco ASAs using software version 9.8(20)? I am trying to implement using TLSv1.2 and ECDH ciphers.Thanks.

I have a internal user that needs to connect via VPN to an external company. The external company's vpn is using FortiClient IPSEC on port 10443. When my user tries to connect it fails. How do I allow this traffic through my ASA?

I have a 5506 with 9.8 (device 1).  If I issue crypto ipsec ? Profile is not an option.  This command appears to be needed for IKEv2 VTI to Azure route based VPN.  (Device 2) does show the option with the same command.  I cannot tell what feature set...