I am seeing end users having their VPN connection disconnected and reconnected when IPv6 addresses change on the LAN network adapter. I've disabled IPv6 on the AnyConnect adapter, Microsoft won't provide support if IPv6 is disabled on the physical ad...
Forum Posts
Hi All, Looking for suggestions on the best way to use DAP on ASA for Cloud Native (specifically Azure AD) Windows devices using AnyConnect VPN. A cloud native Windows device does not have a registry value for domain - so, wondering if anyone else ha...
Hello, I am deploying MFA for one of my customers using FTD managed by FMC version 7.0 and wondering if it is possible to do the following setup: Using RADIUS for MFA-token, and then use DAP looking at LDAP attributes such as "memberof" to then restr...
Hi,I have vpn tunnel all traffic, but no internet - cannot ping anything, not even inside network. Working fine with splittunnel. We test with packet trace and it not work.Need some help with NAT and ACL?Thanks Result of the command: "show running-co...
Hi all, I have a s2s tunnel going to Azure and it is up and functioning. The azure team wants a secondary tunnel up going to their other gateway for redundancy. I copied the exact same configuration over from the primary tunnel but the tunnel inter...
The problem is, the current removal/uninstallations of the Cisco Any connect appliance doesn’t work that well and leaves remanence of older packages behind. The package we deploy should remove it via the MSI we deploy with it, but for some reason the...
Hello, I'm experiencing disconnections on my IPsec VPN, probably due to a double initiation of Phase 2. Here is an excerpt from the 'show crypto ipsec sa' command.interface: GigabitEthernet0/0/1Crypto map tag: VPNMAP, local addr X.X.X.Xprotected vrf:...
I suddenly lost the ability to use AnyConnect VPN at Oregon State University when I upgraded from Debian 11 to Debian 12. After entering my login credentials and the Duo Mobile code from the university's MFA, I get a Cisco AnyConnect banner asking m...
Hello all,We deployed AnyConnect 4.10.05111 last month, and we also use Duo SSO SAML. We have one user who is having problems getting AnyConnect 4.10.05111 to work -- Instead of getting the SSO login page, they only get a blank window.If we remove ...
In FMC I have a local Relm with users in it.I have a RA VPN Configuration set to use the Local realm and inside I have 3 connection profiles. One with the Authentication set for SSO the other two are set for LOCAL. Each connection profile with a us...
Hello Fellows, I need an urgent support. I've configured FlexVPN on my 8500L router, everything seems to be correct according to Cisco documentation but once it's connected, the virtual access interface goes down. I tried all the solutions on the com...
Resolved! ASA Question
Hello,I use ASA with several site-to-site VPNs, everything works correctly (vpn ikev1/ikev2, ssh, asdm, ...)I noticed that access to the page https://public_IP (outside interface) is open and displays "File not found"My question :- Why does it displa...
Make file1vpn default profile from dropdown instead of file2vpnprofile
Dear, very good morning,I have this problem that every 15 minutes I have the following log and all the tunnel interfaces of our ASR1002 that we have on the DC go down. This asr is our HUB and we have many branches like SPOKE.When we see these logs, i...
Hello Everyone, Can anyone help me with mac based RA VPN access process in FTD which is managed by FMC.
