Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
Hi i am suresh i have this problem: below is the version u-boot>> version U-Boot 2013.01-g5d7b4dc (Aug 23 2016 - 11:58:54) SDK version: 2015_T2.0p10arm-openwrt-linux-uclibcgnueabi-gcc (OpenWrt/Linaro GCC 4.8-2014.04 r48430) 4.8.3GNU ld (GNU Binutils...
Hello Experts, What is the heat dissipation and Power requirement in Amperes for MSE 3365? Could not find this info from Datasheet or installation guide? https://www.cisco.com/c/en/us/products/collateral/wireless/mobility-services-engine/data_she...
Hi, We run an isc-dhcp-server for providing addresses for our access-points. The configuration looks something like this: option space cisco; option cisco.server-address code 241 = array of ip-address; class "2700" { <lots of omitted config> ...
Cisco WLC 5508 version 8.3.102.0 We are trying to find out how to set our radius accounting to send attribute 8 to radius accounting. It is the Framed-IP-address log. We have searched but cannon't find the option that needs to be on for this to w...
Hi Guys,Is it possible for a WLC HA device (secondary/backup) be another model?For example, If I am using 5520 as my primary WLC, can I use 2504 or 3504 as my HA?Please let me know my options, Also let me know about the virtual controller.Thanks a lo...
Team, We Have Cisco Express Mobility Controller (1850), does it support Integration with Cisco ISE for Employee (Access to Internal Network) and Guest (Access to Only Internet) with ISE Portal. Regards
Hi All, We use cisco 3850 switchs for our wireless with a converged setup. I'm trying to setup 3 google home devices on a new wlan which is setup as employee and it's not working. It complains of ap isolation problems and also uPNP not working...
Let's assume I have a WLC with load balancing enabled and 20 APs associated with it. A specific client sees only AP1, AP2 and AP3. AP1, AP2 and AP3 has 5, 8, 10 clients connected to them respectively. AP9 is client's out of range and only has 2 clien...
Hi Guys, I am trying to configure a guest WLAN using central WebAuth via Controller SplashPage and after succesfull Authentication local switching in the remote sites Guest WLAN/VLAN. - Using Flexconnect I connected the remote AP to the WLC and set...
Is it best to broadcast a voice SSID?
we are about to deploy 8821 phones and want to make sure they are not vulnerable to Krack available ver 11.0(3)SR5 is now listed as differed. Thanks for any info
Hello Experts, if the control path is UP between the controllers and the control traffic is down , then do the below mentioned factors come into place ? controllers model ? controllers OS version ? virtual IP should be the same ---- thats a known...
I have FHF IP Phone i can't register in existing Cisco Call Manager 2911. Existing call manager tftp server has SCCP69xx.9-2-1-0.loads. What license do i need to register 3rd party IP phone. The IP Phone has SIP protocol. Please help. Thanks.
Sometimes if a cisco phone 7921 roams from one access point to another access point on the same controller, the phone must authenticate again. And if the client have to authenticate again, then it occures voice dropouts. Please take a look at the log...
I am a first time user of Cisco WAP and have set up a WAP371 for home office. I have created 2 identical SSIDs on the 2.4 and 5 GHz radios. I believe the fact that WAP371 had dual radios and not just dual bands I am seeing both these SSID's listed ...
