Wireless

Hi , We have WLC 5508 controller, currently 120 access points are register and more the 2000 user are connected, we need one SSID but we split users in different VLANs. need help??. it possible with one ssid to split users in different VLANs. Thanks 

Goodmorning I get 3 AIR-AP-1832I-E-K9 Cisco Access point, one of them them with Mobility Express the controller run software image version 8.3.102.0, while the AP run image version 8.2.111.0 Controller and AP are on the sime LAN but AP are not able t...

I have a virtual controller, which is with IOS version 8.3.102. My Wlan guest started having user authentication problems. I removed and created a new Wlan. Now users connect and authenticate to the new guest network, but they do not get IP from the ...

Is it possible to prioritize traffic in the CAPWAP tunnel  for example restrict YOUTUBE 

Want to use AIR-AP1832-e-K9c (controller)  with AIR-AP1832i-b-K9 (access points). Is this possible ? 

Hi Everyone, I could use some help with getting CMX Cloud connected our WLC that is running 8.3. I've configured the connector, and it appears to be syncing the Access Points, but the process has been running for the last 24 hours, but hasn't synced ...

Hi Team, The issue is with the WLC 8.2 version which is showing "Invalid Status" in CMX proxy. I am having 4 controllers with same configuration and only 1 controller is showing issue. Tried with re-adding the controller and CMX proxy restart but iss...

Hello, I am deploying 2 new AIR-SAP2602E-B-K9's and I noticed that there is an option to turn off the internal antenna, I am using the 4 external antennas. Should I turn off the internal antenna or is this automatic when the externals are attached, o...

Trying to figure how many concurrent users are supported on an AP - say Aironet 1562I and at 10Mbps. How do you determine this?

I have a few 5508 wireless controllers and the hardware is getting old.  I have to decide if I want to purchase additional licenses for the existing WLCs or purchase newer hardware.  Purchasing just the licenses is a cost effective solution right now...

Hey Team! So we have a problem about AIR-cAP1702I-E-K9 need your support: 1- Following datasheet AIR-CAP1702I-E-K9 ( http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1700-series/datasheet-c78-732347.html) we see transmit power of AP ...

We have a WLC running 8.2.121.0 that has Wireless 802.11b > RRM > Tx Power Control(TPC)) > Minimum Power Level Assignment set to 10 dBm. On a 2802 AP, that should be about power level 5. The WLC Power Level Assignment Method is automatic. The APs are...