Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
I got a WLC box with following firmware I cannot upgrade to normal firmware image as it shows me "Upgrade from LDPE to non LDPE software is not allowed". I did not get any other details or licenses from supplier. How to upgrade?
Hi, I have configured two WLC 5520 now i have created a WLAN guest where the LobbyAdmin create a new user with password. So, i want to know if is possible send an email to the guest users with the credentials. I have seen for this feature has necessa...
I have set up a Cisco 877W router to connect to our business broadband, however it doesn't give out DNS information to the clients. A client will get an IP Address from DHCP ok, but doesn't get any DNS information. I would expect that it would get o...
Hi, Im using ctrl 4404 and ap 1242. My client wanted to connect at 20+ mbps. The max speed he get is 10+ mbps. Are there any way to connect at 20+ ?
I have a 5508 controller and mostly 1142 AP's running 8.0.133 code. The clients keep losing their connections. When I look at the controller the only thing I can see is that the AP's are disassociating from the controller. It doesn't appear to be for...
cambie el sistema de los equipos AP´s para poder administrarlos de manera autonoma con la la imagen ap1g3-K9W7-M y ya logre realizar la configuración de punto a punto estableciendo uno como root bridge y como nonroot bridge y no tengo problemas con ...
We are now in the process of decomming our 'old' 5760 controllers, and MA/MC configured 3650 switches and I have a question as to the migration of the APs. I have done AP migration on APs that were directly associated to the 5760s, but I have not ye...
Is there a link or document explaining and laying out the acceptable range of SNR? I have seen one forum that stated +35 was a good number but would like to have some documentation to back our findings of a Spectrum Analyer report to a client.Thanks
Hi All, I have a location with a WLC and 5 CAP's using a certain SSID. I have 2 SAPs I want to roll out to expand coverage. Can I use the same SSID for SAPs and CAPs on the same subnet? Thanks.
Hi guys, Why I have this message always generating in my AP: Mar 21 11:12:05.823: IP ARP: sent rep src 172.16.16.10 0042.68ba.c1d4, dst 172.16.16.10 ffff.ffff.ffff BVI1 this IP address of AP?! and the IP address of AP in my core sw ARP table is there...
Odd one here. Have 3702 APs that show exactly what you would expect for primary and backup images. In our case right now 8.2.141.0/8.2.121.0. Then we have a slew of them showing primary 8.2.141.0 and backup of 3.0.51.0. These WILL NOT take a new back...
I just got a new Cisco 2504 Wireless Controller and two AP2802i. I had to update the software to 8.2.141.0 before the AP can join the controller. So far everything is working but I want to connect to a SSID that is not broadcasting. I just get "Unabl...
Helo, we have a room (quite big) with 3 AP's AP-1850 dual band positioned as a triangle with 80 people approx. Users relate about frequents disconnections and re connections, loosing connection for a seconds. A bad user experience. In the Prime logs ...
Can anyone inform me how to find the exact number of software defined network SDN controllers to be implemented in wireless sensor network environment. p.s These controllers will be connected via Ethernet cable.
Should the mobility group names for your foreign controller be different from the anchor controller's mobility name. And if so do they have to be?
