Wireless

Hello all. I'm having some issues connecting and managing my recently deployed AP. This is a 1040 AP running in autonomous mode, broadcasting our corporate and guest wireless network. The AP is up and running as expected, but I'm unable to ping or co...

Is there an exportable report that can be run on NCS Prime Infra 2.1 that will provide an AP count percentage of licenses used for each controller? Attached is a screen shot of a visual of what I want in an exportable excel file for WLCs.

Hello,Is BR1310G-A-K9  access point comes with internal antenna ? regSanjeev  

Hi,We have tens of Cisco 1131 AG access points connected to WS-C2960-24PC-S switches.This system work well for few years, but recently, we observe many access points that get very hot leaving black stains on walls above them.Some of them are actually...

We want to use Internal DHCP scope for WLC(s) deployed in SSO Mode. We running 8.0 software on WLC.Will scope work of AP's connected in flex connect mode?

I have got a weird issue in PI 2.1.0.0.87. WiSM2, running on version 7.4.121.21, shows reachable and managed/synchronized in PI. However, the APs managed by it show 'controller IP->not associated' and 'not registered'. It is been confirmed that the S...

I have a question in regards using the Efficient AP upgrade feature for Flex Connect. 1) Do you have to predownload to the Flex AP's first before predownloading to the other APs? Or is it possible to setup a Master Flex AP and triggering the predownl...

Hi, We need to know if it is possible to configure theWAP4410N  (or equivalent items) as RANGE EXTENDER? Hotel-router  W-LAN --->>>  WAP4410N --->Ethernet >>> Computer system(s) We have the following problem: the hotel router has a setting who does n...

I'm trying to create a b/g/n RF Profile and I keep getting this error.Band Select client RSSI out of valid range (-90 to -20)I've set it at -90, -80, -50, & -20  same error. Is this a bug?5508WLC code version 7.6.120.0 

Hi All, I got an old cisco WLC 2106 I would like to try to get running. It seems RAM memory has been removed.Any ideas what is the right memory, is there any cheap replacement?Thanks

Relatively simple question, I am just having a tough time figuring out analyze the data. Anyway... We use the Tamograph Wireless Survey utility and with this utility you are able to perform passive, predictive and active surveys. With the passive\pre...