Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

review


Labels

Forum Posts

Hi Cisco,I need to change the SSID name in Flexconnect mode. However it seems not possible to parallel run the old and new SSID in single VLAN. What is the recommendation to have the both SSID with same IP range, Auth server, so that we will have tim...

Hello,in campus I have virtual wlc (7.6.100) and 20 AIR-CAP1552E-E-K9 and 50 AIR-CAP1602E-E-K9. After some complaints from the clients that are just a few meters away from AP and on those AP's I don't have any clients. On vwlc everything seems fine, ...

dejash123 by • Level 2
  • 972 Views
  • 2 replies
  • 0 Helpful votes

we are following this doc:http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtmlWe are at the part that wants us to:6. Combine the CA.pem certificate with the private key, and then convert the file to a ....

Starthorn by • Level 3
  • 6390 Views
  • 10 replies
  • 0 Helpful votes

When contracting an SMARTNET for a WLC, do we have to consider the actual number of AP's or the maximun?For example, a WLC-5508-50-K9 can handle up to 50 AP's, but at the moment there is only 24 AP's in the network.Which SMARTNET do I need? CON-SNT-C...

jmprats by • Level 6
  • 3966 Views
  • 4 replies
  • 0 Helpful votes

Hi all,I have to replace 500 old APs by 500 new APs (with no change about the configuration, architecture etc). I would like to know if there is a way to automate new APs configuration like AP Group, admin status, mode (local, flexconnect), location ...

I want upgrade vWLC from 7.6.130.0 to 7.6.130.2, but I can not find such image for vWLC. I can only find the upgrade image for WLC 5500(AS_5500_7_6_130_2.aes),but this image can not use on vWLC, when I down it I got error message 'Transfer Failure: t...

yazhu3 by • Community Member
  • 2355 Views
  • 7 replies
  • 0 Helpful votes

Good Morning,I am having trouble tracking down some useful information.Currently I am working through testing using AVC to mark\drop packets on our standard DATA WLAN. I would like this to work so i can put my best foot forward with marking our LYNC ...