Wireless

Hi All,Can anyone please show me how to map a SSID/WLAN ID to a local vlan of a LAP in WLC 5508 using H-REAP local switched? The reason of doing this is to separate Data subnet/traffic from Voice as currently all 7925 handsets using same SSID as PCs....

Hello @All, I wanted to upgrade our three WLC 4402 from software version 5.0.148 to 6.0.202.0. The upgrade on the first controller was working. Unfortunately he lost all the local management users and it's MAC filters, but restoring this was not the ...

Dear All,        We have this access point AIR-AP1231G-A-K9 for mobile users. current version is c1200-k9w7-mx.123-7.JA4. Sometimes users are able to associate but not getting IP address from dhcp. It shows 0.0.0.0 for the particular client. What cou...

Does anyone know if I can enable Mobility Agent on the 3850 access switch if I am using an 8500 as a central controller ?   All documentation seems to suggest the central controller would need to be a 5508, WiSM2 or 5760.Thanks,

I have a Cisco 2500 controller.  I have five Cisco 1600 series wireless access points.  The access points an the same subnet as the controller are recognized by the controller.I would like to add an access point that is on another subnet.  The AP has...

Hi,We have a situation where we are looking to replace our end of life wireless hardware with the 2602E access points.  These are mostly in a warehouse location where the devices using the wireless network use the 802.11 b/g band only.  We have a num...

Dear all,I have Cisco Access Point AIR-AP1142N-E-K9. Current System Software Filename is c1140-k9w7-tar.124-21a.JA1. I want to upgrade it to c1140-k9w7-tar.124-25d.JA2.tar as I am facing some issues in the access point.Somehow I can only donwload c11...

hi guys,I have tow WLC , version is 6.0 One of the WLC successful upgrade and after rebooting the normalthe another WLC successful too , but after rebooting the system version or 6.0 Thanks in advance

   I have to configure DHCP on Aironet 1100 WAP so wireless client will get IP address through WAP. I tried all the option mentioned in Document but nothing is working can somebody help or share their experience.