Wireless

                   Our 5508 controllers (v7.3.112.0) are configured to send trap logs to Prime Infrastructure (v1.2.1.12).  I can view the most recent 2048 traps on the controllers themselves, but am having trouble finding the trap logs on the Prime ...

Hello,I know that the recommendation from Cisco for the mobility anchor feature to work well  is to use the same IOS version on the anchor WLC and local WLC controller.Now I´ll install on a new site a 5508 local WLC with a newer IOS version which is ...

Hi!I´m looking at upgrading some WiSM2 WLCs and was considering to use pre-loading.It will effect about 1000 APs and I then thought it would be a good way to go. But as I plan this it seems that due to this networks design, it might not be a good ide...

Hi my client claimed that right after thry upgraded their WLC 4402 to version 7.0.220.0 from the version that came preinstalled (factory) the can no longer console into the device. They were able to console into the 4402 before the upgrade but now th...

Hello I was intalled a WLC but I would like to know how Can I test the roaming and how to explain to the customer that this take a little secondsand this depende of the devices too.

We want to install Cisco Aironet 2.4-GHz/5-GHz 8-dBi Directional Antenna (AIR-ANT2588P3M-N) for outdoor Wi-Fi.  Our building is a New York City Landmark.  We have to file for permission to attach the antennas.Am I correct that the antennas are white,...

Primary Boot Image............................... 7.0.220.0 to 7.2.115.1 without any issues? Or do I need to upgrade to a lower version first? What might I lose doing the upgrade?TIA,Eric

I have 7 2602I access points deployed and operating in FlexConnect.  We are doing both local switching and local authentication.  These AP's are in a FlexConnect Group with local Radius server defined as the primary server in the Flex Group.  This ha...

Hi All,Again here, I configured and tested PEAP on our ISE with no problems because we want to implement that on our network. The only thing that I found in this process is that for our windows 7 users, the USERNAME field in the login process is requ...

Hello my name is IvanI have a question:Is possible to do a deployment with cisco ise (trust sec 2.0)  and flex connect and web authentication to a cluster of cisco wlc (ios 7.4)?There are a features or requeriments to configure this?RegardsIvan

We are having challenges with our new access points Cisco 1260, it drops connections after a couple of minutes I get the following errors "Two TKIP Michael MIC failures were detected within 30 seconds on Dot11Radio0 interface. The interface will be p...