Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Resolved! AP Number and Positioning
Hi folks,Looking at putting wireless into a large open plan building (appxox. 80M x 40M) with two floors. We'll have up to 450 clients (combination of desktop and mobile devices) spread over both floors so need about 24 APs. With 12 evenly distribute...
Resolved! VLAN Over Remote Bridges (1240AG)
Hi,I've an AP connecting to the backbone switch via 2 wireless bridge links as shown below. Currently, it is operating as flat lan.Would like to know if it can be coverted to vlan mode so that I can support wireless clients of different vlans at the ...
We've bought NCS and are currently running WCS 7. I want to know is it possible to import in all the Maps and the APs that I've already in place in WCS or do i have to start from scratch??Any feedback appreicated.Thanks
I have a access point model WAP4410N , I want to configure for mac authentication by using MS IAS , but when I set MY SSID to radius in wireless connection control and try to connect to that SSID by a labtop I didn't get any logs in my IAS , anybody ...
Hello,I have a question on the correct QoS configuration for a VoIP deployment. I have followed the steps referenced here but have two questions..1) The last recommendation in the list is to set DCA channel sensitivity to High to avoid changes during...
Dear All, Can you give opinion how secure is it connect WLC based Wireless LAN to existing LAN and wireless traffic will go through firewall in order to reach server farm, however, it will only go through ACL for Wireless to Wired LAN access. Please ...
why in cisco WLC we find a/g/n and a/n ? I mean why a/g/n togather and a/n togather ? what is the relationship in a/g/n and the relationship in a/n?? byanother words why a/n companed togather in WLC orWCS and the a/g/n also comained togather also why...
Hi,I have a new Wism to install and it has version 6.0.196.0 I saw that there is a software advisory to stay way from this version. I was thinking in install/upgrade to version 6.0.202.0 but reading release notes i see the following open caveat Wi...
Resolved! officeextend - AP security
hi,is there any way i can implement security for officeextend access points. For example if an officeextend AP gets lost, is there a way i can stop just this AP alone from joining onto the network ?
I am trying the reset to clear the image on the bridge 1400 by using the reset the bridge to default setting but it does not work Follow the steps below:Step 1 Disconnect the power jack from the power injector. Step 2 Press and hold the power injec...
Hello All,I had a question regarding the "AIRESPACE-WIRELESS-MIB" there are a ton of OIDs that contain "MobileStation" within the MIB-Name...For Example: (the following all have an equal number of these OIDs per each one listed below)bsnMobileStation...
Hi,I am confused with the different types of EAP? what are the different types of EAP and what are their differences (EAP, LEAP, PEAP, EAP-FAST, EAP-TLS) ?Thanks
Resolved! Restricting WLANs on a specific LWAP
I've inherited an environment with the following:1 x WLC 440220 x AIR-LAP1131AG-A-K92 WLANs Guest (wide open) Internal (802.1x + WPA2)I'm new to the controller-based wireless environments. My question is how do I restrict which WLANs are acc...
HelloI can not find in documentation order of operations on the interface.Everybody talks just about NAT, encryption. What about other features ?For IOS it's well known, example:http://etherealmind.com/cisco-ios-order-of-operation/What about ASA ?Tha...
I have installed the 1.1 OVA but when i try to upload the 1.0 license and get an error. Is the error dude to the fact the version is 1.1 and I'm trying to upload 1.0 licenses?thanks in advance..izzy
