Wireless

                   Hi ExpertsI have a problem about getting my lisenceI have no idea that what i should fill in the second blank, and I think the words on the left is just a statement, can anybody help, thx so much!RegardsHaohong

Does anyone know if it is possible to use cbac between router subinterfaces in router on a stick situation between two vlans as internal vlan and external vlan?

I have a 50AP wireless network witn Cisco 1242AG autonomous APs, WDS on a dedicated AP, and ACS 4.2.1 (build 15 Patch7). We use EAP-FAST and it works wonderfully. I need to move to controller based operations now (WDS and autonomous APs are coming to...

Dear Experts,I have a question regarding text messaging.Is is possible to send and receive text messages from Cisco 792X Wifi devices via Cisco Unifies Communication Manager 8.5?If so, can someone point me to the right protocol to use from en externa...

Hello,we used to do a client count report for one year. Now WCS version 7.0.230.0 is install and this report no longer works. Error messages appears is 'The report you are trying to generate contains more than the supported number of records (100000)...

hello, i have a wlc 5508 with code 7.0.220, with multicast enabled in it and on the lan too.I am having a bit of confusion getting bonjour to work on the wireless side. Looking at some of the cisco docs, i still have some questions on how to get it w...

Hi there,New to this forum and having a slight issue that I dont know how to fix.I am using a Cisco 2106 WLC running software version                 7.0.235.0. It has two ports configured.Port 2 as ap-manager and goes to 3750 Switch Port 3/0/47Port ...

I am trying to run an AP inventory report for a single controller. I was able to customize the AP inventory report to obtain the data I need, however it appears there is no way to specify a single controller. I have 150 controllers (w/~8000 aps) in N...

Hello,Ok so i tried to but a new image on my AP and putty closed about half way through the installation. now the configuration is messed up. I was wondering is there is anyway to set it back to its factory default settings? I can get into the AP thr...

Hi There are frequent disconnections only for a few clients connecting on specific floors.Seems to be something to do with the access point or the path ..The signal strength drops intermittently what would be the steps to isolate the issue           ...

We have two different version of controller 4.2 and 7.0. Can we have them in one mobility group and how the roaming will be effective?

Hi,We need to create one user for wireless management which only can do specific command on wireless controller. What we can find out is only join the controller to ACS(TACACS+) which only can perform below:The available roles are MONITOR, WLAN, CONT...

Does anyone know of a way or place that the AP Failover setting on the AP is reported in WCS.  I can't seem to find anywhere this setting appears in any inventory report.  The only way I seem to be able to look this up is to go AP by AP and look at t...