Wireless

Hello, I am looking at deploying a 5500 WLC for about 80 remote sites with 1242 APs to connect to using HREAP. Some of these sites have a 512k link, but they are not heavily utilized. I was just wondering if anyone had some tips or had experience (go...

We are troubleshooting connectivity issues in one of our warehouses. The RF guns being used are Motorola/Symbol MC9090. They do support 802.11b/g/a.We moved almost all of them to 5GHz. While moving around and scanning guns drop from the wireless netw...

After selecting the xxxxxx-guest account. the screen did not promptme to enter the password. It error out right away with error message "Can not connect to the network".Is there a URL to logon? Is the password always mixed with one UPPER case and man...

Hi,We are currently using Cisco WLC 7.0.98 and ACS 4.2 and are experiencing an irregular but annoying error.Once ever month or so the MAC auth will fail and stop sending requests to the ACS for authentication and all clients will be denied.The tempor...

/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5...

Hi Everyone!I placed order for four AP-1310, and i had no idea about Lightweight mode AP,I will have to buy a WLC for only four Access points, which would be a complete waste of money,i have been going through forums and blogs to find out methods to ...

Setting up a 5508 for the first time.  It will be installed at my DataCenter.  I'm trying to figure out the best way to connect this to my switch.  All AP's will be H-REAP accessing the WLC over WAN.  I'm good on configuring the WLAN's for H-REAP and...

Hello,How can i find Avoid check for non-DFS channel checkbox on WLC or WCS, when i remove the all non-DFS channel, i get a warning 'at least one non-dfs channel required in dca list' but i have another WLC which working without non-DFS channel.Thank...

HiI have a Cisco 2100 with 16 1131 AG LAP's.  Every few days an AP seems to lock up and lose connection to the controller.  This has happened a few times with various methods to fix.  I either reboot the AP, reboot the controller or reboot the switch...

Just want to ask guys why we receiving the message "16 - Local use 0 -  2 - Criticalsysapi.c 255: Msg 'Port HW Stats get' of Port Mgmt failed, Id = 0x00000000 error value = 0xfffffffc"

Hi there:I have a question.For example, i have a MSE3310 with 1000 client track license installed, what if i have 1001 clients, what will happen?Thanks a lot.

Hi.I have connected the AIR-BR1310G and one meter apart I installed a GPS antenna. When the AIR-BR1310G is up, the GPS stop detecting satellites. Using a spectrum analyzer I found that the AIR-BR1310G transmits a frequency of 1575 MHz along with the ...

So one of our 4402's we had laying around that wouldn't boot and I found that the CF card got yanked.  I put a 32MB Cisco branded CF card just for kicks to see if the controller would recognize it, and it did.  However; I have no idea how to load the...

Hi Wireless gurus,I've recently tried to demo the NME-WLC modules integrated to the Cisco 2921 router. However, I've bumped into an issue with the NME-WLC's connectivity to it's host router.Initially, when I configured the router and the WLC, I did n...