Wireless

We are about to implement WiFi in our warehouse. Need some advice on the frequency and antennas.We plan to use Cisco 5508 wireless lan controllers and 3502 APs. We are not sure if we should use 2.4GHz or 5GHz and which type of antennas we should use....

Hi I wonder if anybody else has seen this behaviour I have a reasonably large network with a smaller site linked by a 1310 bridge pair. About 3 times a day the internet is unrreachable. I cannot even ping the default router's address. Only a reset of...

I've been receiving reports about users in a specific area having issues with the wireless network. The concerns seem to be twofold:1. Users are experiencing intermittent connection issues. They seem to lose connection quite often.2. Users have been ...

Long story, and there could be complications, but it appears the WPM300N is 'bad'?Brief details, but my wife's computer (XP SP3) recently started freezing at random times. Once while surfing she got a BSOD. The last few days it had gotten much worse,...

HelloThe 1042 access point states in its datasheet that it is wall or ceiling mounted. In my experience as an installation engineer I have seen that by far and away the most popular method of installation is to mount them to the ceiling. The datashee...

Hi all,I'm fairly new to the Cisco WLAN architecture and am curious what siginificance the 'Profile Name' associated to an SSID has locally on the WLC?  We have 8 SSIDs all with unique profile names and, I believe, the profile name is only locally si...

Hi allI am replacing my 4404 WLC with the new 5508 series controller, we have 60 access ponts connected to the 4404. I want to install the new controller in pararell to the old one then migrate each access point to the new one step by step.What is th...

Hi All,I've 3 stand alone cisco air 1240 AP which are integrated with ACS and AD servers for authentication in my organization. Since every user is added in AD, people having smartphones are able to connect to AP and browse internet.Require your help...

HiThe LWAPP-upgrade on a AP 1131AG faield with the following error message on the upgrade-tool:"AP does not have supported radio"On the AP is still the autonomus image.Does anyone have an idea?

Hi Guys, 2x Wisms on Software version 7.0.116.0 WCS Version 7.0.172.0 I am having problems with removing an old WLC entry in WCS.. The problem came about when I tried to delete the 2x WLCs in WCS and then factory resetting and rebooted them directly ...

I am trying to add new network device to a new out of the box ISE 3315 appliance under the Administration > Network Resources section.  I was able to do this the other day but now when I try I get an error that says "Failed to create network device. ...

Hi, we upgraded from WCS 7.0.176.0 to 7.0.220.0 to make use of the enhancements to the DB engine.However, we are faced with a problem when we run the AP Summary report. We customized the report to be very basic as seen in the attached image. We only ...

Hi I have 3 2504-50 controllers with around 75 ap's.There are severeral ap-groups and H-reap groups on the tre controllers.I need to be shure to have the exact same config on all controllers to ensure failover.Are there an easy way to do this ?/Per B...