Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

review


Labels

Forum Posts

Hi,     I'm having a problem in one of my customers with the WiFi network. There are two different issues:  1) The first one is that very often the clients get connected to one of the SSIDs but instead of connect to the nearest AP they connect to a f...

gariup.guido by Community Member
  • 1921 Views
  • 1 replies
  • 0 Helpful votes

I have a customer who wants to have 2 seperate customized captive portal pages, 1 for a passthru WLAN and 1 for an authentication.   I know the Cisco default page changes based on the layer 3 security, but to my knowledge, once you set the WebAuth to...

I'm adding a campus to an existing WCS.  Campus has six buildings, each building has up to 9 floors.  Most floors of the buildings are identical, but every now and then we change the SSIDs deployed on a "per floor basis".I'm wondering if there is a w...

tdennehy by Level 7
  • 606 Views
  • 0 replies
  • 0 Helpful votes

I am stumped on this one.  Our campus is switching over to NCS from WCS.  The system is great overall but I cannot find a method to reduce alarms.  If I have an AP I use for testing, and then disconnect it - I will get alerts every 30 minutes pretty ...

We have a set up where there is a media server that has a webcast streaming (unicast).  Any number of iPads will connect to the service and pick up the stream, but then all communication stops after approximately 5 to 10 minutes.  When the iPads, as ...

Hello, GuysThe follow vulnerabilities were found in my WLC - AIR-CT5508-K9:Somebody knows these errors.Port: 22/tcp     Running vulnerable SSH service: OpenSSH 4.0.Port: 22/tcp     Running vulnerable SSH service. Vulnerable OS: Linux 2.6.15 - 2.6.27....

Just recently upgrade our 2 5508 controllers from 6.0.199.0 to 7.0.116.0.  Since that upgrade, I have a handful (8 to 10) of wireless laptops that now refuse to associate to any access points.  The thing these laptops all have in common is some varia...

JOHN KELSEY by Community Member
  • 3183 Views
  • 17 replies
  • 0 Helpful votes

This is the message I am receiving in the controller logs.*Nov 09 14:45:14.813: %CAPWAP-3-POST_DECODE_ERR: capwap_ac_sm.c:4411 Post decode processing failed for Config status from AP cc:ef:48:c2:67:20*Nov 09 14:45:14.811: %LWAPP-3-RD_ERR4: capwap_ac_...

HiWhen using external antannas, what are the correct distance beteen them ?I guess that it is a fraction of the wavelenght, but what is the formula.On a normal 2,4ghz ap the distance is 13,5 cm.Is it ok with the double distance ?What is the optimal d...

pbuch by Level 5
  • 1414 Views
  • 6 replies
  • 0 Helpful votes