Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Hi all,If a guest user authenticates using web-auth is there anything to stop someone sniffing their IP address and MAC address and then impersonating this user. I had always assumed that the "dhcp required" feature would somehow mitigate this but no...
Hello.I integrated CSM 3.1.1 sp3 with ACS Solution Engine 4.1, it seemed a success, but I tried to add a ASA 5540. I add this ASA to ACS before, and I tested, but when I try to add to CSM, CSM give me the error that this device is not added in ACS.Ac...
I have asked the question several times on T.A.C just seeing if there is any other way of doing this?We had a wireless laptop stolen and in case it appeared back on the network we wanted a way of getting an alarm/event automaticaly without doing manu...
Anybody knows the oid on WiSM to poll / mrtg wireless client utilization? thanks.Leo
Is it possible to configure a VTP from one switch to another over an 1300 Bridge?The only sample i've seen at cisco.com is the one with only the vlan 1 being transmitted.The sample with multiple Vlans is for Access Point and wireless clients not for ...
I want to download the trail version of WCS (Wireless Controller System 60) before to buy the license, unfortunately I can't download it and it gives this message you must Have a valid Technical Support Services Agreemen so how should i download the ...
Resolved! WLC redundancy
I have a question about the wlc with the following scenario:1- I have two 50 APs WLAN Controllers (WLC1, WLC2).2- I have 20 APs in total.3- The APs are configured with primary and secondary WLC.4- Ten of the 20 APs are associated to WLC1 as primary.5...
have a 871w in small business aplication. What is the best way to increase wireless range for laptops used with-in the office?
Resolved! Certificate for Guest Network
AT a client site we have a 4402 running and have recently upgraded to 6.0. After upgrading when users connect to the guest network and open a web browser to be redirected to the login page they get the certificate error page in internet explorer then...
Hi,I used to have an ACS 3.3.1 for wireless authentication with PEAP MSCHAPv2, a user has his loging name with an "ñ" as the last letter.After the upgrade to ACS 4.2, the user can not log anymore to the wireless, is the only user with the problems, t...
Resolved! H-REAP with Multiple WLANs
I have a question regarding Multiple WLANs ssids? We have 2 Wlan's for client1 & client2. AP's are setup for HREAP doing local switching for both ssids. Question is I can Authenticate to client1 but can't authenticate to client2 both ssids are runnin...
I am trying to create an ACL on a 5508 for the guest WLAN so it wont be able to access internal networks, such as 172.16.0.0 255.255.0.0 and 10.0.0.0 255.0.0.0. But, the traffic does have to go through these networks to get to the internet. I have ...
Resolved! Question with H-Reap
When H-REAP is enabled would the client pullan IP from the local switch vlan dhcp pool or would they pull from the ap vlan group dhcp pool?ThanksJason
Cisco Aironet 1232 is configured as local authenticator (local radius server option) with leap authentication protocol. Till now I had WPA security.I want to provide any Windows client with any WiFi adapter to connect wireless network. They should be...
Sorry I mistakenly marked my original submission as answered.I have an opportunity for a point to point bridge solution and want to be sure I can use the 1410 in the Cayman Islands and which country code model would I use?Regards,Dave
