Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
I configured client exclusion policy for web authentication , i need to know what is the use of client exclusion time out configured for individual wlans in WLAN advanced tab.
Resolved! ap 1520 and devices on poe out.
Hi. is it possible to connect some ethernet device to the poe out of 1520 AP? how can i get traffic from that device if i know number of vlan? thanks for help
Are the SOAP XML APIs exposed for third party application by CISCO 2710 Context Aware Solution and Mobility Service Engine in CISCO 3350 identical?
Hi,I have been receiving complaints for a period of time from one of our sites concerning the connection stability. There are 18 c1130 series access points on site with both 11g and 11a turned on. The switches we are using at the site are ce500s wi...
Hi!I would like to know if the AIR-ETH1500-150 (outdoor ethernet cable for 1510 MESH AP) has two rj-45 connector or it has one rj-45 and one MS3112P14-12P connector (for the 1510 15010 Access point).Best regards!
Is it possible to create multiple BVI interfaces and assign each of them IP addresses of different VLANs? I have this AP and it's broadcasting 2 SSIDs (1 on VLAN1 and another on VLAN17). They work fine. The BVI 1 has IP 10.0.1.100/24 and BVI 17 has 1...
Is it possible to restore a 4.1.185 WLC-4402 config to a new 4.1.185 WLC-4404?The lease is up and we are replacing old 4402 for new 4404. Trying to find a way to "swap them out".
HiI have AIR-AP1231-A-K9(Obviously FAT).I need to be covered two distances (100 meter and 50 meter).Is there any possibility we can use Bridging or Repeater and Standby AP and extend the signals upto required distance.But main thing is client dont wa...
Hi,Two 1522 APs are randomly disappearing from the 4402 WLC (5.2.157.0) AP list. 802.11a is used by this Mesh APs to connect to Root AP. "debug capwap events enable" command shows the following message:*May 21 19:50:46.681: 00:24:f7:ad:c6:00 Discover...
I was looking in to upgrading a wlc526 and saw that there are only ED releases availible. Checked the documentation and there should be more releases then the ones that are published.I cant upgrade without upgrading to one of the versions that are no...
Hi,I'm very new to configuring wap.I want to configure multiple vlans on my wireless device 1242 AG.When i configure the AP with vlans, i don't reveice the SSID anymore, when configuring back to old config, everything working normal.The situation is ...
Has anyone taken the new CCIE wireless BETA exam? Did anyone else find that they only had 2hrs to complete the exam which simply wasn't long enough.You take on the exam would be appreciated.
Hello Friends, We recently installed 2 4402 WLCs. I configured Mobility group and split the APs between 2 WLCs by configuring Primary Controller on each AP. No secondary or tertiary Controller was configured.Now when WLC1 goes down, the APs on WLC1 r...
I have a 1242AP that I believe is in autonomous mode(the controller doesn't see it but the AP can ping the controller) but I can't upgrade the IOS on the AP. I can ping the AP from my laptop but I can't open the GUI. Is it possible to upgrade the IOS...
Hi All,I have just converted my unit of AP1200 to LWAPP by only copy c1200-rcvk9w8-mx into the AP and set AP to boot from this image. After which, I try have the AP associate the WLC. But it fails and keep reooting. Is there anyway to stop the AP fro...
