Wireless

I have Cisco 1230AP's providing access to my LAN for laptop users. The encryption is via WPA. I now need to setup my guests/visitors - keeping them away from my LAN and internal network and they can only (guest) use internet but all employs should ...

Guys,I have been asked to survey using a Cisco 1242 AP.We only have the LWAPP model can i survey with this and if it needs to be IOS can I role it to IOS any comments gratefully received.Mick

Hi All, Can somebody tell me how this command is used with Cisco Access pointsip http secure-trustpointThanksNikhiL

Is disabling the radios on the antenna enough to replace the existing 3 of the 2.4 Ghz antenna with a different model?Not sure if I need to shutdown the power by unplugging the POE cable from Power Injector and RESET the button to also stop the batte...

We have 9 1010 AP's which all were just plugged in and auto configured themselves from the controller. We now need another AP so I was told that the 1131 was the replacement model. But I cannot for the life of me get it to be seen by the controller.....

Does the Cisco 1121 AG Access Point support WPA2? I cannot find any clear information. I was wondering if maybe the latest IOS supports it?

I'm having a little trouble setting up a WGB on our autonomous system at work. I reviewed a couple of recommended docs but can't seem to get the bridge to associate to the network. The bridge is setup on our ACS server. Could someone review the attac...

I have a wireless controller 4000 series. I currently using RSA tokens to login via ACS but it keep prompting for authentication for every tab i click. ANyone knows how to resolve this?

I have a 4402 controller just recently upgraded to code 5.2.178. I have a new 1142 out of the box and I am trying to get it up and running. It finds the controller and starts the image download but then stops with the following error:capwap_image_pro...

Hello all,If I am user "admin-ken" and I setup an guest user account "guestuser1" via the WCS controller templates > Guest User (which takes me into lobby ambassador), is there a log file that indicates that "admin-ken" had setup "guestuser1" guest ...

Hi, I was wondering if anyone had done a site survey for long distance bridging using 1400's? I am looking at connecting two areas which are approximately 8miles apart. We have a 160' tower that we would place one bridge and the other would probably ...

I've looked at Cisco's VoWLAN Design Guide v4.1 and it has quite a bit of info for Vocera. The controller setup with a multicast address and the WLAN features to properly classify voice traffic is clear to me. I have 'mls qos trust dscp' on all of ...

hi all, does cisco have a wireless solution for a high density, 1-2000user wireless enviroment? 802.11n in the 5ghz spectrum with the appropriate design obviously... but does cisco make an access point designed to handle several hundred associations?...

Hi, we currently have two 1252 APs in our warehouse. We mainly use it for our wireless phones but will have the occasional wireless laptops access. Two Vlans are already configured and working properly. However, we cannot obtain wireless signal in ou...