Wireless

Hello,I work for a company where i need to stage 9120 access points and provision them manually with a AP Name and Primary controller before i ship them out. After issuing the commands it seems the AP just ignores them and doesn't update the AP name ...

Dear Community.I configured a SSID for employees to use, then selected the security type of this SSID as 802.1x. I made the necessary configurations on WLC and ISE. Currently, an employee can authenticate and connect to the wireless network through t...

Greetings,   We had deployed mobility express for wireless complrising of 2800  1800, 1542  6300.   But now we have to replace one faulty 1542 and as this is end of sale - catalyst 1542 is the optio   Can 9124ax join existing mobility express or shou...

Hello,We have Catalyst 9100AX series APs. We want to convert one of them to EWC. We tried to factoy reset both however after the reset they are still act like CAPWAP and stuck at  CAPWAP States.P.S. We have WLCs in our network but we isolated the VLA...

Dear Friends,What was the limitation(Usage,Client) for MR access points(MR36/44/33/53)?Because when on some AP,s have around 40 to 50 users connected that time the AP is misbehaving its gone in hung mode so there was no option other than restarting t...

Good day to all!I'm currently facing a severe problem in ongoing hotel project. initial designer has designed the building allocating one Access Point for each apartment. But certain apartments available that are larger than others. An AP does not su...

Hello all,we are using 5520 wlc(8.10.190.0)and ap's in flex connect mode.currently we have migrated to capptive portal for the guest authentication.users are getting authenticated but they are not getting the ip address, in cisco ise the user is auth...

I have a WLC9800 L.  I installed a wildcard cert and set a trust point. Now I cannot access the management via GUI.  I can still access via putty using the IP. I followed the Cisco documentation for installing the cert but Haven't found anything on t...

Dear Gents,          What are the recommendations that should be followed if we have a local site with wireless APs operating in Local Mode and registering on a local Primary WLC on the same network.  and in the case of Primary WLC failure, the APs w...

I need to change the hostname of a 9800-80 HA pair with thousands of APs and clients connected.  Thinking about the primary and secondary wlc names configured on APs for the capwap join process, how do I gracefully change the WLC hostname?  The ip ad...

Hi there, I am upgrading a bunch of WLCs at different sites from 17.9.4a to 17.9.5.I am performing the upgrade using GUI (browser) with ISSU Upgrade tickbox ticked (AP upgrade per iteration set to 5% to minimise disruption).Problem is, 2 of the sites...

document related to machine authentications using ISE in meraki wifi infra for the corporate devices. I got to configure using user authentications. searched many forums for the same. can anyone point it to correct documentations or link to configure...