Wireless

Is it possible to make with a 1252 a multipoint to point connection, on central building that connect two different buildings, and what about the antenna connections, there are three connections but is it possible to connect 2 antennas one for one bu...

Cisco AP 1200 connected to an L2 switch.Version of AP 12.3(7) JA2 Spectralink phonesThe Spectralink phone sends multicast packets but the other Spectralink phones don?t see them. When making a trace on the L2 switch the packets are visible.For the S...

Hi All, i see a lot of Messages in my Traplog: "Decrypt errors occurred for client [MAC] using WPA2 key on 802.11a interface of AP [MAC]". Does anyone know what this means? We are using WPA2 with AES exclusively, no legacy Clients, all are 4965AGN wi...

Hi,I have tow APs (AP1242AG) that have the two radios (the 802.11g and the 802.11a radios) configured in bridge mode.Can I do this?The problem is that one of them put the radio interface (802.11a radio interface in “reset”. And there is no connec...

I am trying to setup a wired guest access VLAN using the WLC 4402, Does any one know if this actually works? The WLC documentation suggets it is possible but I have heard otherwise.

Hi there,I am using 2106 controller with 1522 AP and external RADIUS and web server (holding the customized login page). Everything works well for the first time when an end user tries to open a web page, the user is redirected to login page and gain...

I need a report of all the Radio MAC addresses for our lightweight AP's. Under the older infrastructure, we could get the Radio MAC's for each SSID/VLAN by SNMP query. However, now the only way to get this information is to click COnfigure -> Access ...

I have two diferent devices with diferente wep key, but the same SSID (in autonomous mode), do you know if in the WLC I can use multiple wep key for this solution? (Im migrating to WLC)

I have two 1131AG with one configured as a Root AP and another as a WGB. Everything is working great except passing multicast traffic between the two. Any one know why? Thanks,Steve

I'm looking for a way for a server to remotely add MAC addresses to the filter on a Cisco 4400 wireless controller. Normally, I would just have the server connect to the controller via SSH, but I don't know how to write a script to deal with the cont...

Hello mates!I've got a strange issue that I haven't encountered before. What's happening is a particular ssid allows an association, but will not provide a dhcp address. Now, I have another ssid on the same controller, pointing to the same dhcp ser...