Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
We have purchased a new Cisco router 2821 (2 E1 cards, 2 Giga Ethetnet) for Internet connectivity E1 through DRS (Digital Radio Signal). Someone has installed DRS equipment at our premises (third party). Now i want to configure my E1 module and that ...
Hi,The LWAPP APs ( 120 x Access Point 1020, configure with static IP address ) and WLCs ( totally 3 WLC 4402 switches ) are in different networks. I guess the DHCP option 43 and DNS resolution method not work. The only one method is configure the pri...
pl suggest me a network solution from cisco. as i want to connect two location having independent LAN at its own and is at a distance of 2 kms and i also want to see the data of one site server from remote location through IP.
Is it possible to encrypt the wireless data between hosts and access point? We use TTLS and PEAP and were under the impression that ALL the data when through a secure tunnel but it appears we are wrong and only the authentication process goes through...
Really the title has it all..I don't find any documentation anywhere that indicates that there is any maximum client count usable using a 2100 series access point controller... We had two lightweight access points connected, and added a third, but th...
I've inherited a couple 4402 Wireless LAN Controllers and am in charge of getting them ship-shape. While I have some general knowledge of wireless, I have not worked with wireless controllers before and have a couple questions I was wondering if anyo...
HelloI configured a guest-wlan with web-authentication. Now, I want from the user to confirm a security-policy after the login. Only if the user accepted this policy, it will get access to the internet.How is the configuration for a such procedure?Re...
First of all I have the radios in a lab with the power set to 5mw. The root state is Association processingThe root event log says RADIUS 172.20.2.105:1645,1646 is not responding. and RADIUS server 172.20.2.105:1645,1646 has returned. The non root st...
I am plannign ob buying a CISCO1811W-AG-B/K9 for a small setup. I need to setup two SSID. One SSID will give access to our local LAN to the users. Other SSID will give access to internet. I dont see why it cant be done but just need to have an expert...
Hi, we are using PEAP-MSChapV2 with Cisco ACS4.1 and Active Directory. Does anyone is available to explain how we do set-up the machine authentication, rather then user authentication?
I have a doubt with the parameter OOS Radios. What is the meaning of this parametes?.
I've 12 APs 1131 connected to Catalyst 3560 POE without controller; once a day, randomly, all access point began unreachable to ping and all wireless client disconnected. I need to shut and no shut all switches port in order to reboot APs and normali...
We use several (80) wireless bootp devices in our network. They of course have been running great on autonomous APs but refuse to work on our WLC wlans. I did a packet capture on the vlan only to find that the wlc 4404 is retagging the bootp packet s...
Here's our topology:1130 series APs -> 4400 series WLC (mgmt vlan 51, client dynamic interface vlan 360) -> Catalyst 4500 series -> DHCP server (vlan id 11)We appear to be unable to relay DHCP requests from a wireless client on VLAN 360 to the DHCP s...
We have an AP we will use for outside shows so it needs to be a DHCP server. I configured the unit with 192.168.2.2 address and the same gateway.Who do I configure DHCP server on the unit?Yuriy
