Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Hello, I have 3 of these devices...one is configured as the root...the other two are non-root....All PC's on the non-root devices can communicate with the root device and other PC's connected via the LAN of the root device....but the non-roots cannot...
We’ve deployed several mobile workstations on carts in a hospital:Neoware (Thin Client) w/Citrix with Aironet PCI cards (both 802.11b & g)The security is EAP-FASTCisco Aironet 1200 AP’s running V12.2(13) JA1The AP is communicating to a Cisco ACS serv...
Hello,I have a Cisco Aironet AP1231G running software version 12.3(2)JA. I need to create a guest SSID that has internet only. I don't want users on this SSID to have access to our internal network. I noticed the "Enable IP Redirection on this SSI...
I tried to setup a 802.11a wireless backhaul using several dual radio AP1232AG with IOS 12.3.8JA and LRF feature. The backhaul consists of a root bridge followed by a daisy-chain of two non-root bridges. Usually non-root bridges only associate to roo...
Hallo,to get it simple - I have only one switch with following equipement attached:1 x AP1130AG,1 x WLSE Express, 1 x DHCP/DNS-Server for 10.0.0.0/24 subnet,1 x DHCP/DNS-Server for 192.168.2.0/24 subnet. The AP, WLSE and...
We are in the process of configuring our new wireless network using Aironet 1200 series access points. These are connected to a switch which in-turn connects through a PIX506E to the WLSE server on the internal subnet. The problem is we the WDS acces...
Our organization wants to implement a wireless internet hotspot for visitors. I have an acl that only allows ports open for www and DNS. However, I want to shut access to webservers that are on our LAN. Any ideas. My current ACL looks like this:p...
Resolved! 7920 & Layer 2 Roaming
The 7920 supports; Static WEP, LEAP and CCKM. In regard to layer 2 roaming which method is the fastest?
Resolved! 2 SSIDs on the same Vlan?
Hi all -Newbie question. When I am setting up wireless, will I be able to use 2 different SSIDs on the same vlan?Example:dot11 ssid Example1vlan 2authentication open eap eap_methodsauthentication network-eap eap_methodsdot11 ssid Example2vlan 2authe...
I wonder if there is any restrictions on having AP350 as a root and 1200 as a repeater? Done a lot of research but could not find any pertinent info. Any suggestions would be appreciated. Yefim
On the 1310 bridge, when you enable “External Antenna”, you are then asked to configure the Antenna Gain (dB). I am using a 13.5 dBi Yagi. My question is, what do I enter in this field? The field only lets me use whole numbers. Thank you for any ...
upgrade to the latest firmware. want to setup ap1200 as a dhcp server for wireless client. but it seems there something wrong with setup. client cannot get IP address from AP. please take a look my configuration!version 12.2no service padservice time...
I have some requirements by a customer. He wants the wireless clients access to internet and not LAN on a cisco 1801wStraight forward. Configure 2 vlan and dhcp pool, 1 for wired and the other for wireless. do a nat inside on both vlans and apply an ...
I have a network of about 30 ap1220b access points. Each is on a seperate subnet with an associated DHCP server. Everything was working perfectly for several years until I replaced one ap1220b with an ap1231g. Clients have no problem connecting to ...
Hi,I would like to ask about BR1300, Please give an idea. What is the max throughtput can reach when using a pair of BR1300 point to point (2km) with DISH antenna (like FTP up/download rate)?And what i need to tunning on BR1300 to gain this result?Ma...
