Wireless

I have recently upgraded two AIR-AP1220B to IOS 12.2(11)JA1. Now when looking under the Network Interfaces I now have Radio0-802.11B and a Radio1-not installed that is grayed out. Where did the Radio1 come from and how do I get rid of it? Also, when ...

Hi,The goal of our application is a data transmission network between the ground infrastructure and vehicles. On the ground, we planned to use LWAPP AP1242 managed by a WLC. On board, we planed to use a MAR3200, fitted with 2 WMIC. In a first time, w...

Hi everybody,I'm implementing an outdoor "bridge" in WiFi.I explane:I have a 5.4GHz of backbone, then a router wich finish in a RJ45 cable (all for an XDSL). I must to use a Cisco Aironet product to bring the 802.11g protocol from the technical build...

We are a fairly large campus with approximately 150 AP's. Currently we are NOT lightweight and have deployed WDS's to locations under the 'recommanded/required' standards.. However, it seems that our WDS's seem to constantly authenticate to the ACS ...

Hi folks, In a AP 1231G-A-K9 I had a problem, making an upgrade the copy did not finish, then, right now I have the next message,Error loading "flash:/c1200-k9w7-mx.123-8.JEA"Witch is my best option ?? is there some tools for that, or xmodem is my on...

hi am using CISCO ACS SE to authenticate my users who connect to my wireless network from the microsoft AD..am using EAP-PEAP.the authentication works fine the problem is that after authenticating and associating my Client connects for about 5 minute...

Hi,Does the Aironet 1300 series works as repeater ? And does it works both as bridge and access point at the same time ?Thank you

We have a wired Aironet 1130AG which we cannot connect to. We got a cable to hook it up to a computer with the Hyperterminal. But we don't know the commands to connect to it. Can anyone give us some advice?ThanksMike

helloi have WiFi network build on AIR-AP1121G-E-K9(6 AP), and CIS-WS-CE500-24LC.in this moment, its just one WiFi network with WPA2 security. q: can i build multiple WLANs on this AP?

i am deploying (1) 1242ag as root-bridge with multiple vlans and ssids but have left the key the same for each ssid/vlan. the remote (4) 1242ag's will be configured as work-group bridges with 1 vlan & 1 ssid for each. The key will be the same on all ...

A wireless bridged site is intermittantly losing voice and data connectivity between the Aironet 1310 bridge and the switch at that location. The wireless connection between buildings is always on. When doing the show CDP neighbor command on the remo...

I am having an issue with my 4402. In the WLAN I have created there is a setting called Session Timeout. This by default is set to 1800 secs. This forces the clients to reauthenticate on the wireless every 30 minutes. I want to change this to 28000 s...

Hi,what is the highest secuirty that we can provide to the wireless phones which are communication with VOICE SSID.pl help me with configuration for Autonomous AP's.