Wireless

How long does the client's credential keep in WDS AP? and is there any method to not authentication through WDS AP? I'd like to using only Radio Mangement for WDS without Fast Roaming. Sometimes many client's authentication request make jamming by WD...

I'm a sucker for Cisco gear and thought I found a good deal when I ran across a HWIC-AP-A/G that would have been a great addition to my 1841. I "rammed" it in it's little slot and it spewed these terrible words:Feb 18 03:45:48.231: %HW-2-OBSOLETE_HW_...

Has anyone managed to connect an IP Phone directly into the ethernet port of a AP1231 using a cross-over cable. We want to deploy single phones in remote locations over wireless without deploying a switch. Although the phone and the AP has its own p...

I would like to use PEAP with ACS 4.0 , I follow a doc from Cisco but no luck.* can any one help me how to deploy PEAP ?* What is the different between PEAP & WEB ?Thanks

How to recover Location server 2710 passwords?The location server 2710's GRUB menu is not show up during booting.

We have a site that needs to bridge across about 50 feet that is not practical for a wired connection.Can you guys give me your opinion on what would be a safe inexpensive way to go, because I am not sure.Would the Cisco 800 series be the way to go?A...

I am just testing WCS (4.0 I think), but when I shut the server down all AP's and maps are gone!In the test environment it is no BIG problem, but what happens when the power fails in the production env.?Is there a way to save?ThanksMichael

During the basic configuration of the WISM modules it asks for WLAN 1 SSID or netowrk name. Instructions says "This is the default SSID that lightweight access points use to associate to a controller"This WLAN is listed as disabled but using 802.1x a...

Hi,I have a Cisco 2811 router,which has 2 fastethernet ports ,WIC-1T card.1. WIC-1T is connected to teh ISP by means of 128KB leased line.2. Fastethernet 0 is configured with Public STatic IP and connected to a switch,where 5 usres are connected with...

We've installed WCS4.0 on Windows2003 server. We can ping WCS to WLC2006, but we can't add WLC2006 in WCS4.0 SNMP unreachable error. Do i have to any adjust to SNMP rechable on windows2003 server? SNMP Community and version is all right.

I would like to place the WCS server on a different vlan than the controller. How do they communicate ?RegardsJ Folkestad

I have an Aironet 1242AG AP,I am interested in creating two different SSIDs with different security levels (eg. No Enc. and WPA2 Enc.).I am also interested in routing between the two (such that one will function like a "backup" connection, which sees...

I started having an issue last week. I have numerous 1100 series Access Points in our network. We have laptops that authenticate through one vlan (1) and wireless IP phones (7920s) that authenticate through another vlan (2). I have a WDS system co...

Hello!I've a Aironet1200 with 802.1x (Cisco Secury ACS) integrated with Active Directory and in a ray of 15 meters of reach my Laptop lost the connection. The most curiosity is that I get looking for the connection status screen and on the exact mome...