Wireless

I am looking for a good lightning arrestor..(not exactly the one that Cisco makes and calls it lightning arrestor). This will be for a steel plant, and the area does get hit by lightning quiet often. What are some of the good lightning arrestors (thi...

Has anyone gotten EAP-TLS to work with the mini 350? I think there is a firmware problem or driver problem. It seems ACU reports the card does not know what is loaded in it once it starts the EAP-TLS process. I have attached a file of what ACU rep...

Hello, I hope someone can help with a problem I'm having.My environment is: Windows 2000 clients with internal Aironet 350 Mini PCI, 1200 model access points, ACS, and Windows Server 2000. LEAP is used for authentication, mutually authenticating and ...

Hi, First: can somebody help me understand the FCC rules saying that you need to decrease the power if you're using higher gain antenna (28 dBi) Power = 24 dBm + 28dBi = 52 dB wich is above the 53 dB specified...Why do I have to set the power level ...

I am currently able to transmit several 3Mb/s video feeds over cat5 ethernet and receive them. But when i try to send the data over aironet access points the video data is incomplete or corrupted during transit resulting in damaged pixels at the view...

Hi Hopfully not to dumb a question:I am doing an Install and have a WLSE 1130 and I can not get any connection to the console to do the initial setup.I have tried 96,8,1,n and 115200,8,1,nI have been config'ing the ACS engine fine so I know my consol...

Is there any way for the IOS local RADIUS to authenticate against a NT or AD domain account list? I understand I can use ACS, IAS or similar to do this, just looking for a cleaner solution for a small site. I'd be willing to use LEAP for client aut...

The idea is to let the pair of units working and forwarding user traffic through the wireless link without any professional antenna installer work on configuration (that is, the installer gets the bridge out-of-the-box) and to make the final adjustme...

I need to reset my AP350, and have read that i can use the ":resetall" command - but that isn't an option. I was upgrading from v12.00T and when it rebooted, i could not connect to it, or ping it. The only way i can connect is via a serail lead. The ...

We are using IBM T42 laptops with the intel wirless chip, and the cisco extensions driver 8.1.0.28. We are having issues roaming between AP. We have the power turned to 50 on the AP and have checked long preempt. What we are seeing is the laptop w...

I'm trying to assign a IP address to my AP. I connect the AP directly to my computer (no DHCP). IPSU doesn't work. I switch my computer's address to 10.0.0.2 (AP is reseted to the default values) but still can't even ping the AP with 10.0.0.1 (should...

We have 1200 APs configured with mobility networks (mGRE tunnels terminated on a WLSM). The APs are pointed at the WLSM WDS and pass their authentication requests to the WLSM acting as the WDS using WLCCP. However, these APs also provide wireless acc...

What is the difference between AIR-ANT1729 (Frequency Range 2.4-2.5 GHz, VSWR Less than 2:1, Gain 6dBi, Linear Polarization) and AIR-ANT2012 (Frequency Range 2.4-2.5 GHz, VSWR 1.7:1 Nominal, Gain 6dBi, Vertical Polarization)?

Hello,I have a Cisco Aironet 350 at home and I use DSL to connect to the Internet. I currently have to change my profile everytime I go home as at work I use LEAP. My problem is that if I go in a different room from my Access Point my neighbors conne...