Wireless

Hello all!I have an AP with multiple SSID/VLANs. The management of the AP is via VLAN 1. I also have VLANs X and Y binded to SSIDs VLANX and VLANY respectively.I have created a DHCP pool that I want to bind to only SSID VLANY users (not VLANX users)....

Hello,About 4 months ago, we installed 12 Aironet 1200s in our building (numbered 10.0.201.101-10.0.201.112). We have 104 and 112 acting as RADIUS servers and, at one point, they were allowing their clients to obtain an ip from a particular scope on ...

Hello...I am planning a wireless site survey with the requirement for the WLAN to support both VoWLAN and location based services. I have read the design guides from the Cisco web site and see that 'monitor' access points are recommended to increase ...

Is there a manual or page that describes what these alarms and error messages mean? I get the blurb from the WCS or Wism, but I don't know what they mean sometimes. I try to search Cisco and other websites, but I don't get a whole log of useful infor...

Scenario:Cisco Wireless Lan Controller WLC4402-25-K9Cisco AireOS Version 3.2.150.6APs 1000 Series Windows 2000 server SP4 (standard edition) with AD, Certificate Services, IIS and IAS.On this controller, we have created 2 WLANS. One to grant access t...

My security team have tasked me with finding an authentication mechanism similar to EAP-TLS that also uses User ID's and Passwords.EAP-Fast would fit the bill but we don't want to run a PAC deployment alongside our PKI infrastructure.I was originally...

Is there any way to dynamically assign a vlan when a guest user associates with an AP.Using Wireless lan controller.I understand this is possible using ACS to assign the vlan dynamically but that requires a username and password to be input.What I ha...

We are using AP1130 128bit wep key and PDA wlan client. The problem is PDA is associated with 128bit wep-key successfully but client have 0.0.0.0 ip address even have static ip address. The PDA communication is OK without wep encyption AP and PDA.

Hello,Can somebody give a document which can describe the upgrade procedure of a 1231G IOS access point to LWAPP?? Is this possible??Raj

Hi,I'm trying to design our Wireless LAN network, and something is bugging me,I want to separate the APs, from our network, by placing them in a separate VRF, this should not be a problem, the thing that bugs me, is when I looked into Cisco documenta...

Hi Mates,Please is there an online help page for 500 series catalyst I have this one for IOS 12.2(25)FY http://www.cisco.com/en/US/products/ps6545/products_configuration_example09186a00806da6c9.shtml but I need more detailes like IOS 12.3(7)JA for Ai...

First time configuring Cisco AP. I have a 1130AG. I configured 2 VLANs (according to Doc ID 69773) and setup IP address on bvi1 port. I can get on a web portal using a cross-over cable connecting a laptop to the AP. However, when I configure a trunk ...

I have a (1) 4404 WLC in our Central office. The WLC is setup with LAG enabled; DHCP is assigned by our DHCP server and is connected to a 6509 router. There are 5 VLAN setup on the router. I have AP?s (mixed 1131 and 1121 converted to LWAPP) on each ...

Hi all. I have two APs setup to bridge across two buildings, one setup as a root and one as a non-root. I can get the to associate with each other, but the problem is that I can seem to manage them. Someone else set these up, and now I cant seem to g...