Wireless

Hello.I have a 2006 with 2 1242 APs connected to it. The problem I have is the 2 APs keep rebooting. they come up, get a DHCP address, stay up for a minute or so and restart. The log on the controller shows this each time it happens:Thu Apr 20 10:54:...

Can WLSE 1130 manage, monitor activity on the deployed access point in remote office/area? If so, how do we configure this on the WLSE or to the deployed AP in the remote office/area.Thanks.

Hello,I'm working with two APs, and I'm not able to make them work properly. The problem is that they're working too slowly, it's difficult to get pings under 1000-2000 miliseconds (I have 10 clients moreorless).And this results strange because I was...

I Have AP350 legacy model. Recently I lost power injector of AP350. So I'll order PWINJ3 soon. Is PWRINJ3 available with AP350?

Hello everybody.Can the two wireless client under the same AP1121G support the multicast forwarding?What do I config on the AP1121G?Thanks a lots.

Hi,I would like to know the procedure for recoering passwords on Cisco 2000/ 4000 series contorllers.Please Help!Thanks and Regards,Mohan

I want to upgrade the existing Layer 2 contollers 4100 and AP 1200 (in the same subnet) to Layer 3 (controller is different subnet from AP). Due to migration in phases, I need to have mix Layer 2 and Layer 3 controllers in short period of time. Any i...

OK so I am setting up a wireless network that is going to have about 500 AP’s on it. There are about 30 at each remote location. I want to use LEAP for authentication. If the WAN connection at a site goes down or worse the ACS server is dead, how can...

Hello,I generated a certificate on my ACS - how do I add it to my windows PC wireless client so I can use it for EAP-TLS. On my windows PC I found certificate import wizard but the types supported are for .P7B, .PFX, .P12 file type and I believe the ...

Hello,I am able to authenticate with EAP-FAST auto provisioning but I am hesitant to use it due to MITM attacks. I generated a manual .pac file on the ACS for my userid and loaded it on the client no problem. But I am unable to authenticate - no erro...

Has anyone used manual PAC provisioning with ACS 4.0 and Cisco ACU 2.6. I create a PAC in ACS using "csutil -t -u <username> -passwd <pwd> -filepath <filepath>". I get a PAC file but ACU returns message "Error importing the EAP-FAST PAC file.".Ran th...

Hello,i have some trouble with my wireless enviroment.The wireless enviroment consist of 30 cisco aironet 1210 access points, cisco wlse and cisco acs with ads authentification.Since the last ios upgrade to version 12.3.8 on the aironet access points...

Hi, I want that the users of the Corporation get access to the WLAN using the active directory? Is that possible? How can I accomplish this task. I'm working with an ACS and AP 1100 Any help will be appreciatedRegards

Hey,I am trying to get WDS configured and working, but for some reason it is not correctly authenticating to the IAS radius server. I followed the cisco document exactly (except configured IAS instead of ACS). I get the following when debugging radiu...