Wireless

We insatalled 9EA AP1200.And we used ACS3.3 Radius server and WDS fastloaming. But yesterday, 7EA APs are hangging. All LED is green and do not operation. We repowered 7EA AP. Now all APs are good dondition. Why APs were hangging? And Why 7EA APs wer...

How can tell me, what I must configure that an AccessPoint can work as an 802.1x Client, for Authentication against a Switch.

Hello,Is it possible to have 1200 AP in repeater mode with 5GHz antenna used for connecting to root mode 1200 and in the same time to use 2.4 GHz antenna for wireless clients ? Wireless Clinets 2.4 GHz ----- 2.4Ghz 1200 AP in repeater mode 5 GHz-----...

If have cisco 350 AP's with IOS upgraded features. IF i want to implement the security features except WEP in a mix users environment like centino laptops. It is a office environment.

My company uses PEAP authentication and the ACU to get it all set up and running so I had to have it installed. However, as soon as I installed all of the CISCO software the automatic discovery of wireless access points that was working in Windows XP...

Software Version: sup 720 -Version 12.2(18),SXD2Problem Details: Using The Sup720/WLSM blade - GRE tunnelUsers are not able to connect to certain websites..ie windowsupdate.microsoft.com , mail.yahoo.comDid a sniffer capture and see the packets are 1...

Hi,I am currently using Cisco a/b/g cards with Aironet 1100, Microsoft clients are authenticating using Microsoft PEAP on a Micrsoft w2k3 IAS server.I want to create a WDS with a WLSE,but the config guide says I need to be running LEAP for this. Earl...

I'm having trouble getting my AP1200's to authenticate to my Microsoft Radius servers. Is there a doc or trick on doing this? It isn't as easy as I'd thought it would be.Also, is it possible to have the AP authenticate against multiple Radius servers...

I would like to reset my AP-352 (upgraded to IOS) to default settings through console.I dont know what to do.The instruction ":resetall" not work in IOS.Help me please

Hi I have 4 AP with EAP enabled. The authentication servers are located globally and the authentication request goes to the server situated in another country. My problem is that when my WAN goes down my WLAN also goes down immediately. Does the AP c...

how to configure PEAP on cisco 350 bridges with IOS upgrade. There is no external radius server in the environment.

I'm trying to figure out how to route incoming and outgoing traffic from a specific host that's located offsite (accessible through a PIX to PIX site-to-site VPN) to a Public IP at my location.If sitting at that remote host, I'd like to browse out wi...

Our school is planning on purchasing 15-25 Dell laptops for use by students. The laptops will be equiped with a wireless card and travel from room to room on a Dell cart. I know very little about wireless and was given the two options by Dell on conf...

I have a wireless Linksys network (connected to a cable modem) at home. Can I use an AiroNet access point to connect a remote PC to my Linksys? In other words, I want to use the Aironet as a wireless adapter for the PC (by connecting the PC to the et...

Situation:Downgraded AP1100 because of problems with the newest IOS. After the downgrade the TACACS+ key seems to be wrong/corrupted on the AP. Our ACS says "Key mismatch". I can't get into the AP1100 anymore.What can I do?Kind regards,Rutger