Wireless

Anyone please confirm that can I use the normal Cat5e cable for the use of in-line power on Aironet 350 Bridge ?I was told by my Wireless vendor that I cannot use the normal type of Cat5e cable instead I must the one supplied by Cisco. Is this true a...

Hi,Is it possible to integrate ACS and CAR with DB-2 Database and if yes, are there any limitations or issues related to that? Does CAR or ACS loose any functionality in such integration?I am not looking for detailed process of the integration at thi...

Has anyone had luck getting ACS 2.6 or 3.0 to authenticate wireless (LEAP)users against a backend AD database. Supposedly issues with Microsoft OS, is causing issues with 3.0, but 2.6 is suppose to work. I receive same errors in 2.6. Policy is set...

We have a radio LAN with 6 AP 350, they are all working well except one,the eventlogs is flooded with the following message :Network Bridge Loop: Received packet from Self destined to [169.1.11.18]0004754e3e2e on port "fec0"All de AP350 are identical...

Is there a way you can have 340's & 350's do a warm reboot without having to go in each AP? I know if you do a firmware upgrade it will automatically reboot the AP, but if you have a mix environment of 340's & 350's will doing a 'distribute firmware...

We have LXE's with Cisco 350 cards in them. We are connecting to 350 series access points with the latest firmware. Our warehouse has enough coverage, as tested with ACU. The problem is that are client access sessions on the LXE's that are running...

We just purchased Cisco AP350 and I'm wanting to use WEP but when I go to the security--Radio Data Encryption (WEP). I get the following message at the top of the screen "Use of Data Encryption by Stations is: Not Available Must set an Encryption ...

Not quite sure if this is the right place to ask, but I've been recently contacted by a private club that wants to set up a wireless network in their marina, which is mostly sailboats. While I've had success with wireless setups in an office environ...

I am using an aironet 350 with Aironet Client Utilities v2.20.05 on a Compaq iPAQ pocket PC running Microsoft Pocket PC v 3.0.11171 (build 11178). When the card is removed for a period of time and then re-insterted I have to re-install the client ut...

Hi,What is the chipset used for the aironet 342/352 aironet client cards? Someone told me it's the Prism II chipset but I thought all along Cisco is using it's own chipset?Can someone clarify this?

Since RC4-128 is not FIPS complaint, I need to add 3DES VPN on top of LEAP. So far only Cisco 3000 and XP worked well. Any advise is welcome.Thanks,Audie

If my ap's ssid is 1234,broadcast is on,my client ssid is 2345,can I associate to my app

Are the two antenna connections designated as incoming and outgoing or are they bi-directional? If they are bi-directional, can different antenna types be connected to each port? Ex. one point-to-point antenna and one point-to-multipoint antenna f...

Hi I would like to know if anyone used arerial splitters to improve coverage and whether or not it was sucessful. i.e. 2 aerials back to the same access point.Would this configuration be supported by Cisco?Ian Vickery

Hi all,I have seen people doing site surveys with the ACU in different ways especially when doing the site survey at more then one data rate. Some just look at the signal to noise ratio in dB levels, while others look at the packet success rate (perc...