Wireless

We recently updated one of our Cisco AP340 from firmware 11.07 to 12.04. All the PCs - Windows and Linux - can get access to the network. But the Macs don't.We turned off WEP, broadcasted the SSID, nothing helped. The Mac don't "see" the network. Why...

Hi,My floor has one AP 1200 installed. Lately, we experienced intermittent connection very often even though we were just a few metres away from the AP. I used Airmagnet to capture/decode the process that took place. This is what i have found.AirMagn...

hii purchased my radio modem conforming to etsi standard but the region i live in follows FCC standard. Is there any way where i can change between FCC and ETSI

What considerations Do I have to know? or Are there any known problems to implement wireless in a Power substation (Electrical) with EMI and Noise?

Hi dears i am using windows XP with all updates and latest IE 6.0 and also latest flash player 7.0.... but when i try to run the game it display a error page that u have not latest flash player however i have installed the most up to date player and ...

Hi i was wondering if any one knew that maximum number of bridges you could assign to a root bridge? At what rate do i need to start worrying about channel overlap?

Hello,I have a wireless network (9 Cisco AP 1200) connected to the enterprise Network (Cisco Catalyst Switch).The wireless network is connected to an another VLAN and i have a router on stick for inter vlan routing.It works well, but it is difficult ...

I have a customer that whats to authencate to a ACS 3.2 to the Windows 2000 server DC. So users have to logon the AD from a wireless connection. I am a little confused on the ACS piece of it. Any help would be great.

I trying to setup a AP1200 radio with two different SSID's with encryption.Each SSID must use a different 128 bit WEP encryption.Both SSID's must have simultaneous access to the wireless radio.I get the client & radio associated but can not pass dat...

Has anyone heard about when Cisco plans to implement 802.11i, now that its been ratified, in its wireless IOS?

Can anyone tell me what is the maximum length of RJ45-RJ45 flylead (the one between the bridge and transformer) I can use?The idea is that while I have the bridge close to the antenna, I can use the 80m flylead to supply power to the bridge from our ...

I about to install (never have installed wireless before) a outdoor wireless backbone as such;building 1 ------ building 5 -------- building 6Building 1 & 5 will have an omni antenna and building 6 a directional one.There will be no wireless clients...

Recently we install 2 wireless sites using the following:Site A -Root BridgeAIR-BR350-A-K9AIR-CAB150ULL-RAIR-ACC3354AIR-ANT24120Site B - Non-root bridge Without ClientAIR-BR350-A-K9AIR-CAB050LL-RAIR-ACC2662AIR-ANT1949AIR-ACC3354We did the antenna all...

Has anyone been able to figure out how to cache LEAP credentials under the Cisco ACU for Linux?Cisco 350 miniPCI, Dell C840 Latitude Notebook.Firmware is 5.30.17ACU is 2.1.13Driver is mpi350.oRunning on RedHat Linux 9, Kernal 2.4.20-8 Thanks for any ...