Hey Community! I'm excited to share something we've been working on that I think will really resonate with many of you managing wireless networks today. We just released the Cisco State of Wireless Report 2026, based on insights from over 6,000 wirel...
Forum Posts
Hi, Has anyone experienced increased latency after replacing AP and WLC from 2702I/5520 to 9164I/9800-40? AP2702I + WLC5508 in centralized (AP local mode) and C9164I + C9800-40 in centralized (AP local mode) Same config, same environment, same radio ...
Resolved! WLC Questions
HiI have a new WLC to deploy as we had one that failed, the new WLC is shipped with an much older version of code installed so I need to upgrade the code, i dont see the old controller code 8.10.150 on ciscos download any more do you know if its be...
Resolved! WLC 9800 - NAC State feature
Hi,I'm trying to figure out on what WLAN's I would use this feature on. Is this specifically for CWA?Thanks
Hi,we are speaking of FlexConnect and I would need the help of the community to better identify this feature whose mechanism I concisely mentioned in the subject.Basically, when a remote branch is very far and the RTT might be high and RADIUS is used...
Resolved! MR Firmware Upgrade plan
Hi, I am planning on upgrading the firmware of MRs at site from MR29.4.1 to MR 29.5.1 as it is the latest stable recommended version. MR models are MR56, MR46E, MR46, MR44, MR42. Total count is 50. We have an activity downtime window so we are opting...
Hi Wireless Experts, I have some questions, 1. Which is better, I deploy a FlexConnect AP in my remote office and associate it to my central office or provide a another WLC dedicated for remote office. 2. I have a remote office which I plan to deploy...
wlc8540 display on cli.FP0.07:[fp_ingress_dns_preauth:952] DNS UDP IPv6 checksum B2DA and len 187FP0.27:[fp_ingress_dns_preauth:952] DNS UDP IPv6 checksum E6AB and len 306FP0.31:[fp_ingress_dns_preauth:952] DNS UDP IPv6 checksum F704 and len 210
I am trying to restrict some (but not all) Wireless users during off hours.It’s a pretty basic setup with one SSID using PSK.I want to allow traffic for certain users only from 7:00 AM to 5:00 PM.Or in other words, I want to block traffic from Midnig...
So we're having hit or miss experience recently.If I am understanding this correctly Windows 10(22H2) / 11 are now defaulting to TLS 1.2 (or maybe even 1.3) and this is causing authentication issues when communicating/trying to auth with the old RADI...
I am trying to register Outdoor AP with WLC but it can not be registered. I checked WLC version, But it is OK. Showing error message in Outdoor AP "DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:224 Connection 0xBD6C63...
Resolved! WLC 2504 died. Got a new WLC 3504. Have no backups. Just the CF Card taken from the WLC 2504
Hi everyone, WLC 2504 died. Have no backups at all from the wlc2504.Managed to take out the CF Card taken from the wlc2504.Retrieved quite a few XML files.Is there any way to use these files and/or adapt them to configure my new wlc3504 to replace th...
My company is having a problem with users turning down the Speaker volume on the phone(7281) and missing on broadcast announcements. Is there a way to lock the phone speaker volume to max.
Hello, i have Cisco 2600 series device and it got a problem. Some one got it reset and erased all files from the boot.Any idea what do i need to do to restore it ?? some one told me i need to get tftp server.And the cisco flashing in red light
Hi Team, We need to pull the social media usage guest SSID report from Cisco WLC. Please advise: ++ if possible, to get the social media report for users while connected to guest WiFi. ++Which website users are using while connected to guest WiFi. ++...
Resolved! APs fallback to DHCP
Hi,all our APs are with static IPs. Now and then APs fallback to DHCP mode and I can't figure out why. Can I disable the IP fallback feature?Regards,Petri
