Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Ladies and gentlemenI've got a problem here. For unknown reasons, the controller is 5520 while it's version is 8.1.123, and it's an old device. Recently, I found that the portal authentication we did ourselves cannot automatically jump after linking...
Access Points disjoins and joins the WLC frequently. It's a new AP here are the logs that were observed. %CAPWAPAC_SMGR_TRACE_MESSAGE-5-AP_JOIN_DISJOIN: Chassis 1 R0/0: wncd: AP Event: Session-IP: *************************** CAPWAP DTLS session clos...
We have issued related to AP bandwidth performance too low. Scenarios Cisco Aironet1832i convert to the controller ( Cisco Mobile Express) and other AP joined controller as well. We try to test bandwidth from AP to provide SSID and got bandwidth ar...
Resolved! C9800 and Firebox
Hi Chrome can access WLC9800 without any issue, Firefox cannot. Please see the below. It used to access it. Dont know what happen. The below info is different with what we saw before. In the past, when visiting 9800, we got a warning saying accessing...
Resolved! 1142 APs not joining with 2106 WLC
Hi, I have a 2106 wireless lan controller and two 1142N-N-K9 LAPs. I am building a lab and am trying to get the APs to form a CAPWAP tunnel with the controller, however, this is not succeeding. So far the APs receive IP addresses from the pool config...
Clean Air is showing disable on Cisco 9130AXI AP when using it in a dual 5GHz on (SLOT ID 2). I was able to manually change it to enable but after sometime it will revert back to disable. I check the WLC and Cleanair is enable. This is only happening...
Resolved! Wireless and wired device in 802.1x
Hi We have Wireless and wired devices which need 802.1x authentication via ISE. We can see wireless authentication in ISE ( under Operations ----> Radius -----> Live logs) but cannot see wired devices authentication. Is this because wired device has ...
Hello,The power injector I am currently using (Model: DPSN-35FB A) has a blinking green LED for AP Power and a solid green LED for AC Power. I'm not sure if this is supposed to happen or if there is something wrong with the power injector. Appreciate...
Buena tarde a todos espero me puedan apoyar, tengo una duda al configurar un ssid en la WLC 8510 en el ancho de banda del Qos me marca que el rango limite es invalido si lo configuro con mas de 500 MB , me gustaria saber si es es posible configurar ...
Using the Intel AX201 and AireOS 8.10.162.11, our Desktop team are building a lot of laptops which can't connect to our WLAN. When doing a debug, I can see: *Dot1x_NW_MsgTask_4: May 16 14:20:05.208: [PA] a4:42:3b:7x:xx:xx Entering Backend Auth Succes...
hi,i'm posting screenshots of my wifi config and i'd like to know if there are other settings to improve my AP 2600i wireless connection.i have a fiber connection of 1 Gbps (with ethernet cable cat 7 25mt i see in ookla speed test 978mbps!) with the ...
Hello,My EA2700 router just functions just perfectly. The Guest Acces also, although very rarely used.Until today, when it appeared that the guest access dosn't function anymore.When starating to browse, the browser tells the user to register (with p...
Resolved! WLC 9800 RADIUS failover failure
So we were upgrading our RADIUS servers and when we did we noticed that the RADIUS failover did not happen as expected. I'm thinking my predecessor has the AAA Advanced settings set up incorrectly but I am not familiar with this model controller. Can...
Hi, I have little to no experience with cisco EWC.I want to create a 2 separate SSIDs which are Internal and Guest.I think in EWC, Guest settings is included. I want to use the same LAN subnet for both SSIDs. And I don't want the Guest Wifi to access...
can I have HA Between C9800-L-F & C9800-L-C ?
