Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Hi,I am not sure how many of you have noticed active role switchover issues in 9800-CL HA SSO deployment, in my case I have 2 x 9800-CL in same ESXi host, Gig 2 interface is connected to vSwitch1 which is in trunking and promiscuous mode accept, Gig ...
Resolved! Cisco 5508 trunk port configuration
I am trying to configure a Cisco 5508 on my test network. Does the connection from my switch to port 1 on the 5508 need to be a trunk port?Thanks.
Hello, Any toughts on how to resolve this issue? Clients that connect to ssid via cisco ap's in a Controller environment are seen as rogue ap's:Rogue client: 76:28:b3:98:25:c8 is detected by 1 APs Rogue Client Bssid: f0:c4:2f:9f:22:bb, State: Alert,...
Morning, I am trialing a 9120axi at home with the 17.4.1 embedded WLC, all going well untill this moring, one laptop connects but cannot even ping the AP, let alone get any exernal connectivty. All other devices are fine. Its like the client is diab...
Hi I am having a problem connecting my mobile devices (iPad, phone, and tablet) to macfiltered wireless networks. It keeps saying "unable to join" error on phone. However, it connects fine on laptops, after adding the mac address. The issue is only w...
So I just landed a new position in an environment with around 50 APs across 12 locations. They are a mix of 1400 and 1600 Aironets. Every single one is running as an autonomous AP with PSK authentication, which I definitely need to fix (among other t...
Resolved! WLC 5508 disable centrally switched wifi
Hi all,I got a central wlc5508 and all my Access points (AIR-LAP1142N-E-K9) are connected via flex connect.When i go to Wireless -> All AP's -> click on one AP -> FlexConnect -> VLAN Mappings, there are 5 Wlan Vlan Mappings and two centrally switched...
Resolved! Switch for MR 46 WiFi APs
Hello,we are planning our new WiFi infrastructure with Cisco Meraki and a lot of MR 46 AP.I am not very common with PoE and so I need help to find out the right PoE+ switch. I have read the MS120-8FP datasheet and I have a understanding problem.Small...
i have two 3702e waps, i play on using them in my old house (going to mount them in my loft space front and back) - is it possible to get them to talk to each other in autonomous mode ? i want them both to transmit the same ssid's, so i get full cove...
HiIf I enable encryption on a new Mobility group im about to create will it reboot the WLC,? we already have a mobility group which does not use encryption. wlc 8540code 8.10 Thanks
I know that AP1700/2700 support the unified mode from version 15.3.3.http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap1-overview.htmlBut I could not change the mode because of the following e...
Dear i try to convert AP Cisco 3602I from lightweight to Autonomous but when i change the mode for access point to upload the file from T FTP i cannot ping between Switch and Access point (Time Out). thanks for your help
please help
Hi, Cisco AP and WLC can ping each other. and the AP looks like joined to wlc, but I cannot see any debug message at AP side and cannot see the AP in WLC. Do we have some commands at AP side for us to test and see the status of the WLC and the AP? T...
Resolved! Converting a 1100 AP to LWAPP
Hello,is it possible to upgrade (or downgrade...) a 1100 ap to LWAPP and use them with a 4400 WLC ?Thanks in advance.RegardsMassimo
