Hi everyone, I'm working in smart working in the company with anyconnect connection. My company told us to connect only with the lan cable and not with wifi. I wanted to ask you how does the company understand that I am working in wifi from home? Wha...
Hi all,I got 2 virtual C9800 controller on 16.12.2s.HA is configured which means they act as active passive.1) Is it possible to do an upgrade from 16.12.2s ED to recommended version 16.12.3 MD ?2) will there be any impact?3) will both controllers be...
HiI've been trying to join a AIR-CAP1532E access point to a 3504 Wireless Controller but my efforts have been unsuccessful. The 3504 controller can see the access point but it does not allow it to join. The errors bellow keep appearing every time the...
We have 2802E Cisco AP. We wanted to use as wireless bridge . In older ap there was standalone mode but with newer ap whatever I read it's not supported anymore & this ap comes with mobility express. Can you set up the bridge mode in Mobility expr...
Hello everybody,nice meeting you!This is my first post and I write to have a little support.I will soon open a small Wine Dining Bar.Unfortunately I don't have much IT knowledge. I just need a simple solution that allows me to create wifi for custome...
Is there a way to see what SSID or even better, what AP a client authentication is failing on? We use a 5508 WLC with an ACS 5.8 for radius authentication and ACS reports only show the mac address for which the failed authentication on a particular u...
Need some assistance on this. I am trying to configure a VoIP SSID using MAC-based access control so that the WiFi phones do not need to authenticate to the network. However, I'm having issues with setting up the users in AD. The phones are Incominc ...
Hello, Rogue detection on AP can do that on the wireless scope. Now, about the wired scope.Is the only way to detect/alert unauthorized AP on the wired network through network vulnerability scanning tools or Cisco ISE could also do that ? Thanks,Edou...
Hello everybody, Can i link my cisco ap 1852i with a Ldap for authentication , or use a radius in AP and link with LDAP ? Thank you for all
Guys, Did anyone integrate mobility express solution with LDAP server before? As i already found the below link that contains the attached info: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-5/b_cisco_mobility_express_8_5/b_ci...
My school got an old school building that has a AIR LAP1252AG-A-K9 in it.I know it is old, however, what do we need to use it?I was told something like an AIR-RM1552A-A-K9.If that is it, can that be made with a virtual build and not a physical one?I...
We have a 3355 MSE appliance, and we do not have the admin password for the web. I have tried just about anything (even re-running the startup wizard and redoing the password for Admin, which for some reason wouldn't take. We are at our wits end as...
HelloI have CTVM v8.10.122 and a AP2802E. I have configured a WLAN attached to the management interface, that is untagged (no VLANs in my network). The issue is that clients cannot connect to the WLAN. In the clients I can see the SSID in the availab...
Hi all, I've been searching but unable to find the answer to this question. Does a client laptop's signal need to reach the actual AP for it to work or just to the AP's signal, if you have a link to any documentation that I could read too that would ...
Hi All, I need to migrate about 50 mesh APs to a new WLC. Both the existing WLC and the new WLC are running the same code (8.3). What's the best practice to do so? Thanks,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM | ||
| 08-10-2026 11:32 AM | ||
| 08-06-2026 09:29 PM |
| User | Count |
|---|---|
| 5 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
