The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Hi everyone!Please help me to understand, why under "line con 0" is "transport input|output ssh|telnet" command, how it used and how should I connect devices (ex.:RTR <-> RTR ) on L1 and configure them to make it work?Thank you in advance!
!!How do I Talk to someone On Hawaiian 헔헶헿헹헶헻헲혀? How do I talk to someone on Hawaiian 헔헶헿헹헶헻헲혀? !!How do I Talk to someone On Hawaiian 헔헶헿헹헶헻헲혀?<<#Talk Hawaiian Phone assistance: One of the quickest ways to speak with a Hawaiian support agent is by c...
Hi,I have a C9300U and T switch models.I wish to downgrade from 17.9.5 (ROMMON 17.9.2r) to 17.6.5.Do I need to downgrade the ROMMON version for 17.6.5?Thanks in advance
Hello,Both the Grammarly and ChatGPT sites are accessible, however, the WSA will not allow us to use the them properly. In the case of ChatGPT, if you try to open a document, the error shown is, "Can't connect to Grammarly. your network configuration...
Hi, after upgrading the ASA SHIMO VPN app stopped working. I noticed that openconnect stopps working as well and to fix this issue for openconnect I just added --useragent=AnyConnect and it started to work. I tried to add this to shimo in expert mode...
Hi all,this ist a part of our switch port config on a C9300 with an IOSXE 17.9.X:+++interface GigabitEthernet1/0/7description RADIUS Portswitchport access vlan XYswitchport mode accessauthentication priority dot1x mab+++now due to some internal issue...
Join us to learn more about how to create unforgettable experiences with Webex Webinars.This session is tailored to provide you with a comprehensive understanding of the platform's capabilities, focusing specifically on hosting engaging and effective...
Join us to learn more about how to create unforgettable experiences with Webex Webinars.This session is tailored to provide you with a comprehensive understanding of the platform's capabilities, focusing specifically on hosting engaging and effective...
I've got this interment problem where my ip phones aren't able to get an IP address from DHCP. I've got a mix of 9200L and 2960s POE switches. I've experienced the issue on both models, with different version of firmware on each. Different DHCP serve...
I get the regular connect and disconnect messages ie the 7220xx messages but I tested several bad password attempts and they do not get logged. is there a way to log this?Would be interested in creating an EEM that would alert on a significant amount...
we are using Cisco Aironet 1815i Access Point as a WLC and Access point and need to be upgrade the firmware version 8.5.140.0 to 8.10.185.0. please suggest the step by step process that we need to be followed.
I am using vwlc in conjunction with Cisco AP 2702i. I've configured two SSIDs with MAC filtering authentication. Certain APs are displaying a 2.5g connection, while others show a 5g connection.What could be the problem
Hi Guys.We are running Firepower 3140 Appliances. There are 2 * 40Gbps connection. The Physical (ETH2/1) 40Gbps interface has the MTU set as 9000 whilst the Sub Interface (ETH2/1.10) and (ETH2/1.20) has the MTU still at 1500In this scenario,1. Is the...
Hello, i still asking about how the network send the data to internet looks like. Can anyone help to explain.Every data we send to the internet will always pass through the ISP, which means the ISP can know the destination (and perhaps the contents o...