The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
On November 21st, 2024 Cisco will disable the following weak ciphers on our servers: TLS_ECDHE_RSA_WITH_AES_128_CBC_SHATLS_RSA_WITH_AES_128_CBC_SHATLS_ECDHE_RSA_WITH_AES_256_CBC_SHATLS_RSA_WITH_AES_256_CBC_SHA Changes will impact: * Opendns.com -...
Customer is trying to utilize APIs, but I don't know how to help him get the access he needs. I read another post and even tried accessing CSAM internally and I get the same error as the account SE. Here is the post that talks about the wrong/no per...
On November 21st, 2024 Cisco will disable the following weak ciphers on our servers: TLS_ECDHE_RSA_WITH_AES_128_CBC_SHATLS_RSA_WITH_AES_128_CBC_SHATLS_ECDHE_RSA_WITH_AES_256_CBC_SHATLS_RSA_WITH_AES_256_CBC_SHA Changes will impact: * Opendns.com -...
What IP address should be set as the system-ip address in the vManage template? 1. The IP provided by the wireless sim provider?2. The IP to assign to the ENET interface of the CG522-E? ( for local management )3. The IP to be used on a SD-WAN VPN (...
Hi All Just setup a switch for remote access. did the following: ip ssh v2ssh input on vty linescrypto key generate rsa modulus 2048username xxx password xxx i can get into the switch using ssh and the vlan interface ip address. i cannot get into p...
I have an acs 5.5 which lost the console password, so I want to use the password recovery procedure, but i can't find the the recovery iso download in cisco.com , please tell me where can I get this download?
I have a C8500-20X6C running version 17.12.3a and I want to config a IPSec tunnel with ISAKMP group 5, but looks like it is only supporting the bellow DF groups: Router(config-isakmp)#group ?14 Diffie-Hellman group 14 (2048 bit)15 Diffie-Hellman grou...
Good afternoon.I need help to configure an alarm to warn that the Apllication server service is not running or is initializing. The ISE version is 3.2.0.542 Patch 6. Best regards.
Hello ACI people, I would like to kindly ask for a second opinion. I have a internal Firewall pair connected thru the L3Out_1, running OSPF area 150. This L3Out_1 is implemented in Pod1 and Pod2 on a pair of leaves 101 and 102, then the same L3Out_1 ...
Cisco Unified Communications Manager uses closest-match logic to select the best pattern. When multiple matching patterns are present, the best pattern is selected based on two factors: It matches the dialed string. AND It matches the fewest stri...
Hi All,We're using ACI in our environment and ran below command. I am not able to figure out on which leaf the tunnel destination "10.9.152.77" resides. I think the tunnel destination is the VTEP assigned to a vPC. How can we search it centrally and ...
Hi, wondering if people are using generative AI in the ICT industry, and if so, what for, how often, and how much are you personally able to rely upon it answers.
Scenario:I am trying to figure out a way to prevent AD accounts from being locked out when brute force login attempts to the RA-VPN occur.RA-VPN configured on FTD. Radius authentication used via ISE pointing to AD. DUO MFA works fine, no issues, but ...