Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
Cisco IOS XR Resilient Infrastructure
by Luc De Ghein -
Smart Account Notifications are Moving to Cisco License Central
by sasibert -
ISE with AD and multiple domains
by Leonardo Santana -
Cisco IOS ASR9001 upgrade from 6.6.3 to 6.9.2 steps/upgrade mop
by morabban -
Don’t miss these webinars in January
by Rbritolo -
C4500e (VSS) to C9500 (StackWise) migration with minimal downtime
by s-mouhamad -
Audio problems with new installation of Webex Room Bar
by bekzod-fakhriddinov -
Cisco UCCE IVR Campaign recording
by rasheed911
Community Activity
Cisco UCCE IVR Campaign recording
Question for UCCE prosI am working in a Cisco UCCE environment with CVP where we use Outbound IVR campaigns. I want to record the IVR campaign audio for quality and compliance. Looking for clear guidance from folks who have done this in production.My...
Devices falling off the network - Can restore them by readding to ISE
Hi,We have a strange issue where devices that are in an identity group on ISE which in turn get authorised and download a DACL are falling off the network at seemingly random times.Example Switchport:interface GigabitEthernet2/0/23description "Exampl...
Cisco 2802i AUX Port as LAN Port
Following the instruction from the link below, I converted the AUX port of one of our Cisco 2802i AP's to a LAN port. My hope was to feed a switch from it so I could provide network access to three devices. So far, I can not gain network access. Has ...
Resolved! Unity Connection Cobras Import error
Hi guys, I am running Unity Connection 15.0.1.11900-14 and have created a backup using Cobrass Export V8.0.90. As part of an effort to clean unused voicemail accounts, I wanted to ensue I had a valid backup in case of accidental deletions. However,...
Resolved! Guidance on Replacing HSRP Configured C9300 Switches
We are planning to replace two Cisco Catalyst C9300 switches that are currently configured with HSRP.Could you please recommend the best approach to perform the replacement while minimizing service downtime?Any detailed guidance or best practices wou...
ISE with AD and multiple domains
Hi, Our customer wants to add a new Microsoft AD with a different domain. Scenario Domain A xzy.com Domain B yyy.com We are using TEAP for DOT1X authentications. How can i authenticate computer/users with two domains and Ads? Do i need to change my ...
Tloc-extension with NAT enabled for private colors.
Introduction Tloc-extension with NAT enabled for private colors. Use cases/Scenario -> When P2P link for tloc extension can't be advertised to underlay network due to design. -> When using private TLOCs like mpls, metro-ethernet. Default Behav...
ASA External Interface Lease renewal ?
Hi folks, We have a ASA on 9.12(4)67. There is an ONT that is connected on the external interface and we use DHCP to retrieve our IP and gateway etc. for out internet connection. If this interface drops and then recovers (ONT is in a different room ...
C1000 goes offline randomly but connected devices stay online
HiSince 2 weeks 1 of the C1000-switches we have goes offline at random moments, usually 1 or 2 times a day. When it is offline there is no way to connect to it; the weird thing is, everything that is connected stays online and can use their network. ...
Cisco IOS ASR9001 upgrade from 6.6.3 to 6.9.2 steps/upgrade mop
I am looking for a MOP (or application that can help create the MOP) for ASR9001 and ASR9001-S upgrade from: 5.2.2 to 6.9.2 & 6.6.3 to 6.9.2 Can someone please help.
Routing to SVI Over Trunk in IOS XE - Can reach hosts but not GW?
Good morning Cisco Community, I feel like i am over looking something simple here. I've built a SVI and propogated it into OSPF on a L3 device. On one interface of that device there is a host connected through two cascaded layer two acces switches....
BPDU Guard
Just a simple question why it's recommended to use both Portfast and BPDU Guard together apart from the very fact that both should be used in access switches ports connecting to end users?? Like BPDU Guard will still work if I don't have portfast con...
Resolved! C4500e (VSS) to C9500 (StackWise) migration with minimal downtime
We are planning to replace a C4500e with a C9500 with minimal downtime. What is the best approach considering that the C4500e is in VSS and the C9500 does not support VSS but StackWise? Would using HSRP be advisable here?
UCCX API Queue stat
Hi all,we want to build own monitoring for current queue stats for UCCX 12.5.I have found in older posts that /finesse/api/Queue/<id> is not supported, and if i try it I just get all values with -1Also found that :9443/realtime/VoiceIAQStats would wo...
UCCX Preview Outbound Campaign - CSV File Limitation
Hello, This is regarding UCCX 12.5 SU3 We have tested the Preview Outbound Campaign successfully. However, when we imported the real data, we have "First Names" that are complex names and the import is failing due to the space or special characters (...
