The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
I just received my first publicly signed certificate that does not include the client authentication key usage. Apparently this is an industry change happening: https://www.sectigo.com/resource-library/tls-client-authentication-public-ca-end-2026#...
Hello Experts,We have 5 digits internal calls from site A to siteB . Site A hears site B but not in the revers direction. Attached is the WireShark capture.Many thanks, MK
Hi,I am unable to think of scenarios where suppress-inactive is of any use.I understand what the command does and how it works, i.e. suppress rib-failed BGP learned routes due to an IGP with a lower AD being in the RIB and whose next hop differs from...
Hello I am working multiple setups but this one was supposed to be easy, until it was not. I am sure I am overlooking something tiny, but nevertheless. Long story short; here is my config and I get not get any NAT translations and or any internet a...
Hi, I am having problem re-associating an AIR-AP1562E-Z-K9 access point after it was previously associated with a C9800 controller. The AP is currently running image version 17.12.5.41 and is unable to join back to a Cisco 5508 controller running ver...
I've been advised that I can add a PTZ camera to a Room 70 Dual G2 but it does not work. The CODEC is same unit as a Room Kit Pro so I'm not sure why this would not work. After booting the camera, it will spin and read the room, but that is the exten...
Could someone help me with software upgrade for IE-3100-8T2C from Cisco IOS XE Software, Version 17.12.02 to Cisco IOS XE Software, Version 17.12.05, unable to find exact steps online
Hi did anybody get this to work? i am using Win10 64bit installed the 64bit driver from cco which is kind of old - back from 2014 Cisco_usbconsole_driver_3_1.zip install and restart i see the USB Serial Port COM 4 in device manager changed in put...
Looking to mirror the same content on two displays coming from Cisco Room Bar. Currently cannot get it to show the content screen on both screens, it is just displaying the participants on one screen, and the content on the other screen.
Hi team, I have a stack of 2 switches 9500 of 48 ports and 2 sw 9500 of 24 ports. The question is whether to use the install or request command. The .bin file should only go in the flash of the active switch...?. What is the correct way to do t...
Hi, I'm looking for some help/advice on automating the configuration of ATA420 devices in Webex Calling. This involves creating a workspace for each device/port on the device. These devices support up to 144 devices on each. Once the workspaces are c...
I seem to be encountering an issue when upgrading Cisco Secure Client VPN from 5.1.5.65 to 5.1.6.103 where the UI folder does not extract the new UI version to the correct location C:\Program Files (x86)\Cisco\Cisco Secure Client\UI.Instead the shor...
greetings everyonethis is about an issue i am facing with my Cisco 2960x switches. i did a firmware upgrade from 152-7.E10 to 152-7.E11 image which currently is the recommended one.Unfortunately for some strange reason, after reboot the switch goes i...
Hi All, Am trying to advertise default router getting from Site01Edg101 over ISIS on RTR-PE-35 , and now try to adverstie this default route to VRF Cust-A using OSPF , but not able to succeed. Configs is mentioned below for some tips . Secondly I b...
Hi,In my lab enviroment, I have a wlc9800m with ios xe 17.17.1 and a view ap's like 9136 and 9176 and a windows server as a CA. The idea of the lab is, that ap's has to join the controller via certificates.For the lab setup I used the following guid...