Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
[Q&A 集公開] 11/13 開催 Webex TAC Live Day 1
by Eri Mizuno -
How to limit as that are advertised to one neigbour BGP
by kwojtyra -
Different root bridge for each vlan on a stack switch
by amitspanchal -
Howto: TLS cipher and version analysis for 802.1X clients using Syslog
by Johannes Luther -
[録画公開] 11/14 開催 Webex TAC Live Day 2
by Eri Mizuno -
Browser-Based SSH and RDP support
by Naveen Elango -
Crypto Key RSA no longer supported
by thomas-moffat -
Catalyst IE 3400H 24T Stuck in POST Mode
by a-e
Community Activity
Creating One-Way-Routing between to linked Networks
Hello colleagues,I am NOT a Cisco-certified specialist but rather focused more on IT forensics and regular client/server technologies.I have created a link using a routed port between an SX350X and a CBS350. The CBS350 has the subnet 10.10.10.0/24, a...
Resolved! FTD Missing Logs
FTD 7.4.1I’m currently troubleshooting an issue with our FTD and I’m unable to generate logs, which is puzzling. I ran a system support trace that produced a few logs with an ID, and I matched that ID to my access list, confirming that logging is ena...
Prisma II XD Platform
Regarding the Prisma II XD Chassis we have been getting an intermittent alarm over Input Power Supply Voltage. This issue appears to clear instantly making it difficult to troubleshoot. It does appear to point out a module inside the chassis, but the...
Howto: TLS cipher and version analysis for 802.1X clients using Syslog
Hi community,I was challenged to find out, which 802.1X supplications use legacy TLS versions (and ciphers) for TLS based EAP methods (like EAP-TLS or PEAP). Main motivation is to harden the ISE configuration by disabling legacy TLS versions and ciph...
Catalyst IE 3400H 24T Stuck in POST Mode
I have a new from supplier 3400H switch that let me go through the Day 0 configuration and initial setup. Power cycled at the end like i have always done to other setups to verify the settings stayed and the switch came up and continuously flashes th...
Cisco IOS XE Network Operations using API
Hi,Is there a yang module for RESTCONF that can be used to carry out cli commands, like ping and certificate imports. There is a yang module for icmp, but that appears to be configuring icmp rather than actually carrying out a ping. For certificate m...
Cat Center Question using Interactive Commands
Hello, I'm attempting to execute my first interactive command but it's consistently failing. I've tried various approaches, but I'm still stuck. Any advice would be greatly appreciated.#INTERACTIVEauthentication convert-to new-style <IQ> Do you wish ...
QFP Load on C1111
I often get the following error when I load a router with traffic. %IOSXE_QFP-2-LOAD_EXCEED: Slot: 0, QFP:0, Load 85% exceeds the setting threshold 80%.5 secs traffic rate on QFP: Total Input: 31561 pps (31.6 kpps), 274136312 bps (274.1 mbps), Total ...
SIG - Web Policy Issue?
We experience inconsistent user experience when using the internal network or on-network, there are times that we can access the site or not and no logs are captured. We are using AD users' identities only that shared information with roaming client....
How to configure MDNS on cisco 9800 WLC for same VLAN
How to configure MDNS on Cisco 9800 WLC for same VLAN and do we need to configure anything on the L3 switch which is connected to WLC to MDNS work.
Umbrella-Meraki Integration
Hello, I have a couple of questions regarding the Umbrella-Meraki integration. A customer just did a migration of 45 MX devices and they are now showing up in the Umbrella portal under network devices. However almost all of them are showing as offlin...
BGP Configuration Screen mussing on ASA 5508-X
Hi everyone,I have an ASA 5508-X with ASA 9.12(4) and ASDM 7.9(2).I needed to configure BGP for a VPN with Azure but in ASDM there is no BGP inside Device Setup / Routing or Inside Monitoring / RoutingI configured and tested BGP using commands and it...
Resolved! Duo Deployment to protect Gsuite emails
Hello everyone,I was looking for information on how to deploy Duo for a customer using G Suite emails. This customer doesn't have a Windows server or any other authentication source. Is it possible to deploy the Duo MFA solution?Thanks!
Cisco Hyper-Converged Infrastructure: Why Nutanix
In an effort to support our most engaged customers in the Cisco Insider programs and the Cisco Community, we recently ran two exclusive Ask-me-Anything sessions on Cisco HCI, the content of which we’re delighted to share with the Community today. W...
Umbrella Certificate: Issued by??
I am experiencing different "Issued by" validation of the certificate, it should be by Umbrella no matter what sites are either allowed or blocked. Like this: am I right?But when I checked it using a different website, it showed different "Issued by"...
